CCC Exhaust valve switch - Difference between F22 and F15
Discussion
Evening all
I swapped out my 07 Vantage coupe today for a 2013 Roadster and want to transplant my exhaust switch. Does anyone have the installation instructions for later Fuse 15 cars by any chance?
In the 07 Vantage one wire plugged into relay 5 which on that car was spare. Any ideas where to plug that wire on the later cars?
Thks
I swapped out my 07 Vantage coupe today for a 2013 Roadster and want to transplant my exhaust switch. Does anyone have the installation instructions for later Fuse 15 cars by any chance?
In the 07 Vantage one wire plugged into relay 5 which on that car was spare. Any ideas where to plug that wire on the later cars?
Thks
I don't know whether it is the fact that my new car is a Roadster, whether the 4.7 sounds different to the 4.3, whether I've installed the switch wrong or whether the previous owner locked the valves open but I'm struggling to hear a difference in the two settings since installing the switch..
I can hear the switch "click" in situ so I know it is working however I can't hear a noticeable change in exhaust note either on the move or when the car is stationary. In the 4.3 at tick over you could hear the valves open and an obvious change in tone without even moving.
I can hear the switch "click" in situ so I know it is working however I can't hear a noticeable change in exhaust note either on the move or when the car is stationary. In the 4.3 at tick over you could hear the valves open and an obvious change in tone without even moving.
I guess the trick is to shove a fuse back into socket 15 and see if that makes any difference or not. If it does then it’s your relay switch.
If it doesn’t then the butterfly valves may have got stuck (not experienced this myself but I gather it can happen if the fuse is left out for a long period).
As you know from your 4.3 the difference between valves open and closed should be very noticeable under load
If it doesn’t then the butterfly valves may have got stuck (not experienced this myself but I gather it can happen if the fuse is left out for a long period).
As you know from your 4.3 the difference between valves open and closed should be very noticeable under load
I bought and put on my 2015 last year. I found the same thing, it was almost impossible to hear when it was on or off. But it was working. I had it installed for a total of one day before I just pulled it off and just left fuse 15 out. My car has the sports exhaust and is loud either way. The dealer did tell me to put the fuse back in every so often to keep the valve working.
Bobajobbob said:
I don't know whether it is the fact that my new car is a Roadster, whether the 4.7 sounds different to the 4.3, whether I've installed the switch wrong or whether the previous owner locked the valves open but I'm struggling to hear a difference in the two settings since installing the switch..
I can hear the switch "click" in situ so I know it is working however I can't hear a noticeable change in exhaust note either on the move or when the car is stationary.
In the 4.3 at tick over you could hear the valves open and an obvious change in tone without even moving.
I can hear the switch "click" in situ so I know it is working however I can't hear a noticeable change in exhaust note either on the move or when the car is stationary.
In the 4.3 at tick over you could hear the valves open and an obvious change in tone without even moving.
If you could hear a difference at tick over on the 4·3, then there might be a specification difference with the 4·7.
My understanding with the standard 4·7 'fuse in' basis, is that the valves are;
Open up to 1,500 rpm
Closed between 1,500 and about 4,000 rpm
Open above about 4,000 rpm.
Therefore the difference with 'fuse out', is only between 1,500 and about 4,000 rpm (which is probably most driving time).
At that engine speed I cannot hear a difference from inside the car (might be more pronounced with your roof down Roadster), but perhaps the change is clear if standing at the roadside. Never tried though. I have however been told, that my car can be heard from over a mile away, when in the upper rev range,
Removing cats seems popular on this forum, if you do want more exhaust noise.
Edited by Jon39 on Sunday 25th March 19:30
Jon39 said:
If you could hear a difference at tick over on the 4·3, then there might be a specification difference with the 4·7.
My understanding with the standard 4·7 'fuse in' basis, is that the valves are;
Open up to 1,500 rpm
Closed between 1,500 and about 4,000 rpm
Open above about 4,000 rpm.
Therefore the difference with 'fuse out', is only between 1,500 and about 4,000 rpm (which is probably most driving time).
At that engine speed I cannot hear a difference from inside the car (might be more pronounced with your roof down Roadster), but perhaps the change is clear if standing at the roadside. Never tried though. I have however been told, that my car can be heard from over a mile away, when in the upper rev range,
Removing cats seems popular on this forum, if you do want more exhaust noise.
Edited by Jon39 on Sunday 25th March 19:30
I need to do more testing between 1500 and 4000. Maybe it is simply less noticeable in the 4.7. as there is less of a need to rev higher.
Ah sorry I misunderstood - thought you had taken it out on the road
I found with my GT8 (which is essentially a secondary decatted 4.7) that it wasn’t obvious just parked on the drive, giving it a few revs. But moving under load it’s very very noticeable (my son calls it “hooligan mode”
I found with my GT8 (which is essentially a secondary decatted 4.7) that it wasn’t obvious just parked on the drive, giving it a few revs. But moving under load it’s very very noticeable (my son calls it “hooligan mode”

AstonV said:
I bought and put on my 2015 last year. I found the same thing, it was almost impossible to hear when it was on or off. But it was working. I had it installed for a total of one day before I just pulled it off and just left fuse 15 out. My car has the sports exhaust and is loud either way. The dealer did tell me to put the fuse back in every so often to keep the valve working.
All the switch is is a relay that cuts the power to the exhaust valve. Exactly the same as pulling fuse 15 cuts the power. The only difference is that you can effectively pull fuse15 remotely. The benefit clearly being that you can silence the car when you’re simply motorway cruising and don’t want it too loud.If you couldn’t hear a difference with the relay switch in then something wasn’t working. I assume you can hear a noticeable difference with fuse 15 pulled? If so then you may have had a faulty relay
Double check the fuse location you have it in, and try 22 if 15 isnt working. You will need to take it for a drive, but it is quite noticeable on a 4.7, albeit overall volume is subdued compared to the 4.3
To get it back to 4.3 levels (and a bit more) you need to lose the secondary cats. £500 ish job, even available as a dealer option now they are so popular
To get it back to 4.3 levels (and a bit more) you need to lose the secondary cats. £500 ish job, even available as a dealer option now they are so popular
Thanks for all the feedback. I need to do some back to back testing with fuse pulled completely to give me a benchmark with the new car.
It sounds fantastic anyway and with the roof off it may be less important to up the noise as it sounds so damn good anyway but always nice to have the option.
It sounds fantastic anyway and with the roof off it may be less important to up the noise as it sounds so damn good anyway but always nice to have the option.
RobDown said:
All the switch is is a relay that cuts the power to the exhaust valve. Exactly the same as pulling fuse 15 cuts the power. The only difference is that you can effectively pull fuse15 remotely. The benefit clearly being that you can silence the car when you’re simply motorway cruising and don’t want it too loud.
If you couldn’t hear a difference with the relay switch in then something wasn’t working. I assume you can hear a noticeable difference with fuse 15 pulled? If so then you may have had a faulty relay
I could hear the difference when the car was not moving and blipping the throttle, but once driving it was difficult to tell if the valve was open or closed, so I just removed.If you couldn’t hear a difference with the relay switch in then something wasn’t working. I assume you can hear a noticeable difference with fuse 15 pulled? If so then you may have had a faulty relay
It's honestly not a huge difference with or without the fuse. A little louder at lower RPM's without. I always engage the sport button, I believe this opens the valves at a lower RPM. It is not noticeably louder cruising on the freeway without the fuse. Would like to remove secondary cats or change them out, but in CA any modifications would take the chance of not passing emissions check.
Bobajobbob said:
Thanks for all the feedback. I need to do some back to back testing with fuse pulled completely to give me a benchmark with the new car.
It sounds fantastic anyway and with the roof off it may be less important to up the noise as it sounds so damn good anyway but always nice to have the option.
That's the way I felt, it's too much fun not to get on it all the time. I said to heck with the switch, just let it roar! It sounds fantastic anyway and with the roof off it may be less important to up the noise as it sounds so damn good anyway but always nice to have the option.

Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


