New Home Server - Setup & RAID controller
New Home Server - Setup & RAID controller
Author
Discussion

Russ_H

Original Poster:

367 posts

253 months

Monday 2nd April 2018
quotequote all
So.....following a lightning strike which took out my last server (plus loads of other PC & AV stuff rage & smile) the insurance company has sent me i5 powered server in an 8 bay Chenbro SR112 tower chassis.

Main uses for the server is storing video / DSLR pics / Bluray rips, CD rips, Plex, plus all the usual Office stuff - nothing complicated.

Midrange ASUS motherboard only has 6 Sata ports so I'm thinking I need a simple RAID controller or HBA card.
I've got a couple of pretty ancient AMCC 3ware 9690SA-8i cards kicking around.

I want to keep it simple and mirror the data - is it worth using the 9690SA card as either RAID 1 / JBOD or should I just let Windows 10 handle everything.

I tend to bluff and You Tube my way around IT stuff so mechanical engineer level replies please! wink

Cheers

theboss

7,570 posts

250 months

Monday 2nd April 2018
quotequote all
I just built a software mirrored volume using disk manager in Windows 10 and it seems perfectly good and fast.

My rationale was that if the machine fails either (or both) of these disks can be connected to a SATA port on any Windows machine and will be readable. With a hardware disk controller this might not be the case.

What CPU microarchitecture did you have in the old machine? I'd be interested to hear how you get on with Plex with a current gen CPU... as if you enable hardware acceration it should be able to do all the encode/decode work with the iGPU including HEVC. I use an nVidia card and only certain processes are supported in hardware.

Russ_H

Original Poster:

367 posts

253 months

Monday 2nd April 2018
quotequote all
The old machine was running an elderly C2D E8400 while the new one has an i5-7400, 960 Evo SSD & 8GB DDR4 memory - should be more sufficient for anything less than 4k

theboss

7,570 posts

250 months

Monday 2nd April 2018
quotequote all
Russ_H said:
The old machine was running an elderly C2D E8400 while the new one has an i5-7400, 960 Evo SSD & 8GB DDR4 memory - should be more sufficient for anything less than 4k
You should be fine for 4K as that Kaby Lake i5 has full hardware support for 4K HEVC encoding and decoding - effectively Plex can transcode 4K on the fly without needing to hurt the CPU. The only question will be whether your disk subsystem can keep up but a with a pair of decent modern disks that shouldn't be a problem.

dmsims

7,510 posts

298 months

Tuesday 3rd April 2018
quotequote all
Windows 10 Home won't do raid or RAID 6 or RAID 10

Russ_H

Original Poster:

367 posts

253 months

Tuesday 3rd April 2018
quotequote all
Server is loaded with Windows 10 pro so the inbuilt mirror is possible.

The question is if the 3ware card still cuts it or something more modern is required- current motherboard doesn’t have enough sata ports.

Cheers

dmsims

7,510 posts

298 months

Tuesday 3rd April 2018
quotequote all
Russ_H said:
Server is loaded with Windows 10 pro so the inbuilt mirror is possible.

The question is if the 3ware card still cuts it or something more modern is required- current motherboard doesn’t have enough sata ports.

Cheers
They are are a good card!

Russ_H

Original Poster:

367 posts

253 months

Saturday 15th September 2018
quotequote all
Update.......

So I’ve bought a couple of 4tb WD Reds only problem is that the 9690SA doesn’t recognise the drives - assume it doesn’t support drives over 2tb.

Windows 10 pro has been handling a simple mirror OK so will probably stick with that.

Upgrade time - what relatively cheap HBA do people recommend? Upto £150 to spend.
Have seen HP H220, IBM M1015, lsi sas 9207-8i mentioned.

Thanks

dmsims

7,510 posts

298 months

Saturday 15th September 2018
quotequote all
Russ_H said:
Update.......

So I’ve bought a couple of 4tb WD Reds only problem is that the 9690SA doesn’t recognise the drives - assume it doesn’t support drives over 2tb.
You need to update the firmware / driver

9.5.5.1 had "Support for Hard Drives Larger Than 4 TB"

Russ_H

Original Poster:

367 posts

253 months

Saturday 15th September 2018
quotequote all
dmsims said:
You need to update the firmware / driver

9.5.5.1 had "Support for Hard Drives Larger Than 4 TB"
Damn - I’d already talked myself into upgrade or two! wink

Will have a look - thanks.
For future reference, any recommendations for a better card?

Cheersthumbup

Russ_H

Original Poster:

367 posts

253 months

Sunday 16th September 2018
quotequote all
Any opinion on a LSI SAS 9201-8i - seems to be a HBA only card which is what I want.

There are a few cards on eBay that come with the latest firmware - no faffing with flashing or putting in IT mode.

Cheers