ERR5198 5AM MAF AFM

[blaze_away]

Spoke to soon on another thread.

Looks like the afm I have is intermittently faulty. Yesterday I tested it and it was all good
It was 0.32 volts static signal ignition on and 1.7 volts on idle.
Today its slow and 0.6 volts static.

So where to get a good used one from folks ?

Dont really want to go after market ribbish

[blitzracing]

https://www.atpelectronics.co.uk/p/land-rover-rang...

Edited by blitzracing on Tuesday 3rd April 20:45

[blaze_away]

Very interesting. Not come across them before.

[blitzracing]

They have been around for a few years doing ECU's, so an old School AFM with a few op amps and resistors inside it should not cause them any technical issues!

[lancepar]

blaze_away said:

Spoke to soon on another thread.

Looks like the afm I have is intermittently faulty. Yesterday I tested it and it was all good
It was 0.32 volts static signal ignition on and 1.7 volts on idle.
Today its slow and 0.6 volts static.

So where to get a good used one from folks ?

Dont really want to go after market ribbish

Frank,

I have one you can try if you want, I say try because my Chim won't need it, or so the PO says, when I get round to refitting the engine management system he started to install. So I might need it sometime in the future, not sure at present.

Anyway I get to Snitterfield on a Tuesday or Thursday, weather permitting. Send me a PM if interested.

Lance

[blaze_away]

lancepar said:

Frank,

I have one you can try if you want, I say try because my Chim won't need it, or so the PO says, when I get round to refitting the engine management system he started to install. So I might need it sometime in the future, not sure at present.

Anyway I get to Snitterfield on a Tuesday or Thursday, weather permitting. Send me a PM if interested.

Lance

Hi Lance

Just sent you a pm

Cheers
Frank

[lancepar]

Just the middle bit?





See you soon.

[blaze_away]

Yep thats it the middle bit.

Thanks
Frank