Vantage 2014 Garmin Satnav can you upload gpx files to it?
Discussion
I have a portable Garmin which I can upload BaseCamp routes to as gpx files. Looking at the built in Vantage Garmin, I can't see any way of importing routes and there doesn't seem to be any information in the manual. Does anyone know if it is possible to import / export gpx files to the Aston Garmin?
David
David
Blue,
Not sure if you can import waypoints etc, but here's how to upgrade the maps
http://garmin.openstreetmap.nl
Maybe you can workout some voodoo to import WPs.
Not sure if you can import waypoints etc, but here's how to upgrade the maps
http://garmin.openstreetmap.nl
Maybe you can workout some voodoo to import WPs.
Blue7 said:
Thanks for the input, I will check out the map upgrade site but where is the SD card slot located, is it on top, at the side or at the back? My portable Garmin has the SD card slot on the l/h side.
From memory its above the left rear wheel arch in the boot. You can certainly update the maps yourself with a bit of know how with standard Garmin maps (that have been unlocked)I did a bit of playing with gpx files today and the short answer is no, the unit will not read gpx files on the sdcard and import them into the routes options.
I suspect it is a firmware issue because the unit reverts back to the preinstalled garmin maps if the sdcard is removed and reinserted (without the ignition being used) requiring the user to reselect the 'free' updated maps as per earlier in this thread. The unit is set to default to read from internal memory only. The portable garmin units will detect gpx files (if in the correct folder) on a sdcard when booting up and ask to import, whereas the aston unit will not. The only way I can think of to sort this would be to install gpx files on the internal memory, but it would be a lot of trouble to access the unit's internal memory.
Much simplier to buy a garmin suction car mount and use the portable garmin as it was designed. I will go down this route, or similar as I dont have the aston nav open when I drive anyway.
I suspect it is a firmware issue because the unit reverts back to the preinstalled garmin maps if the sdcard is removed and reinserted (without the ignition being used) requiring the user to reselect the 'free' updated maps as per earlier in this thread. The unit is set to default to read from internal memory only. The portable garmin units will detect gpx files (if in the correct folder) on a sdcard when booting up and ask to import, whereas the aston unit will not. The only way I can think of to sort this would be to install gpx files on the internal memory, but it would be a lot of trouble to access the unit's internal memory.
Much simplier to buy a garmin suction car mount and use the portable garmin as it was designed. I will go down this route, or similar as I dont have the aston nav open when I drive anyway.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


