Aston Martin Volante DB9 2005 front and rear pads - help
Aston Martin Volante DB9 2005 front and rear pads - help
Author
Discussion

Alex007

Original Poster:

4 posts

152 months

Monday 16th April 2018
quotequote all
Hi,

I am new to Aston forum.

I need to change front and rear break pads on my 05 Aston Martin Volante.

I recently purchased the car to only use it during weekends. I am not an experienced AM car owner :-(

I tried AM dealers, they charge around 500+ for each pads incl fitting, which I find crazy!

I have seen on PistonHeads some suggestions for other brands.

Some have suggested Pagid T2070, seems reasonably priced but the drawback was the squeaking noise, that I find annoying even with the

genuine part.

Please could an experienced AM car owners suggest an alternative to the genuine brake pads that's proven to work for them and NOT squeaking (if possible) :-)

Many thanks for your time and advise.

Cheers,
Alex

tonyhall38

4,194 posts

247 months

Monday 16th April 2018
quotequote all
get pads from euro car parts.....

get an independent to fit them...save yourself hundreds...

telum01

987 posts

146 months

Monday 16th April 2018
quotequote all
Brake pad options:
https://www.youtube.com/watch?v=XNeYWcwOoD0

Brake pad installation if you want to do it yourself:
https://www.youtube.com/watch?v=IREVDvIa4tU

Alex007

Original Poster:

4 posts

152 months

Monday 16th April 2018
quotequote all
Thanks Tony.

Which pads would you recommend?

Cheers

Rappa

663 posts

301 months

Monday 16th April 2018
quotequote all
Hi Alex,

I went for Pagids (OEM) from Rick at:

http://www.bmgautoparts.co.uk/

However look at Rich's (telum01) YouTube vid above, I might try the chamfered (less powder) pads next time.

Sean

telum01

987 posts

146 months

Monday 16th April 2018
quotequote all
Quick note: The chamfering helps with brake squeal (common) and pedal shudder (rare). The pad compound is what affects the dust. You can chamfer OEM pads to help with squeal, but you'll still get a lot of dust from them.

leerandle

834 posts

138 months

Monday 16th April 2018
quotequote all
I bought some EBC yellow stuff for the fronts and as predicted by others are quite dusty (horrible brown dust).

I'll probably replace with the Porterfields R4-S in the summer.

I have tried the EBS yellow stuff with and without the shims and neither squealed, but I did use lots of Mintex Ceratec brake lube to help.

telum01

987 posts

146 months

Monday 16th April 2018
quotequote all
The extra shims were a bandaid to help keep the Pagids from squealing - but that only prevents the squeal that results from the caliper piston contact on the backing plates. The brakes can still squeal because the front OEM pads aren't chamfered. Basically, brake dust builds up on the leading edge of the pad, and that buildup leads to squealing. Chamfering the pads prevents that buildup, and thus helps prevents squealing.

Shims help prevent squealing from the backing plates of the pads.
Chamfering helps prevent squealing from the friction material of the pads.
Pad compound affects dust levels (and color). Hawk and EBC both dust brown. OEM Pagid and Porterfield both dust black.

Alex007

Original Poster:

4 posts

152 months

Wednesday 25th April 2018
quotequote all
Hi all...thanks so much for your help.

I had a chat with Rick and I am going ahead with his supply of Pagid pads. He has good review on them and re-assured me that nobody has reported back in regards to squeaking issue.

@telum01 - by reading your reply it seems to me that you will not agree as the pads needs to be chamfered. How is that being done?

On another note - can the Aston service be done independently as well - just the oil change and filter - saving hundreds or would you still go through Aston dealer. Has anybody done that?

My car is a weekend car and I don't exceed 2000 miles per year.

Cheers

leerandle

834 posts

138 months

Wednesday 25th April 2018
quotequote all
telum01 said:
The extra shims were a bandaid to help keep the Pagids from squealing - but that only prevents the squeal that results from the caliper piston contact on the backing plates. The brakes can still squeal because the front OEM pads aren't chamfered. Basically, brake dust builds up on the leading edge of the pad, and that buildup leads to squealing. Chamfering the pads prevents that buildup, and thus helps prevents squealing.

Shims help prevent squealing from the backing plates of the pads.
Chamfering helps prevent squealing from the friction material of the pads.
Pad compound affects dust levels (and color). Hawk and EBC both dust brown. OEM Pagid and Porterfield both dust black.
Cant the brown/black 'dust' be removed from the pads before fitting, then it would never appear when braking...........roflrofl

tonyhall38

4,194 posts

247 months

Wednesday 25th April 2018
quotequote all
would use indie for service...lot cheaper..but if only doing 2k per year....perhaps do oil change yourself every other year...and proper service there after....will decrease value a little but you save on the running costs

V12JDC

190 posts

121 months

Wednesday 25th April 2018
quotequote all
Alex007 said:
Hi all...thanks so much for your help.

I had a chat with Rick and I am going ahead with his supply of Pagid pads. He has good review on them and re-assured me that nobody has reported back in regards to squeaking issue.

@telum01 - by reading your reply it seems to me that you will not agree as the pads needs to be chamfered. How is that being done?

On another note - can the Aston service be done independently as well - just the oil change and filter - saving hundreds or would you still go through Aston dealer. Has anybody done that?

My car is a weekend car and I don't exceed 2000 miles per year.

Cheers
Hi,

I have had a set of front disks and pads from Rick, no squealing and the quality is excellent, you wont be dissapointed

I plan to do rear brakes in due course

I also do similar mileage on a similar age DB9 and do all my own maintainence. I am a qualified technician and have worked in automotive technical training for 10 years. I take photos of all procedures and am building up a nice file of activity which as a buyer i would value

I take it to an independent Aston place for MOT and any specilaist work like wheel alignment etc and feel happy I am preserving value, considering its age.

They are no more complex to service that a standard car, but a PDF workshop manual is very helpful for procedure and torques.

Hope that helps

John