Exhaust replacement - DIY?
Exhaust replacement - DIY?
Author
Discussion

johnnyBv8

Original Poster:

2,482 posts

222 months

Monday 16th April 2018
quotequote all
I've bought an AM sports exhaust for my 2010 V8V Roadster - has anyone changed the back box on their car themselves? I'm assuming it's straightforward, but thought I'd check on here first - I'd just have it on axle stands, so not that much clearance if it's awkward. If it's going to be a pain I'll just get the garage to do it!

Graze01

1,203 posts

123 months

Monday 16th April 2018
quotequote all
Johnny

Have a look on Redpants website to see if there is a diy video

Graze

johnnyBv8

Original Poster:

2,482 posts

222 months

Monday 16th April 2018
quotequote all
Graze01 said:
Johnny

Have a look on Redpants website to see if there is a diy video

Graze
Good idea Graze - but unfortunately not!

Gingernuts

553 posts

241 months

Monday 16th April 2018
quotequote all
Yep, pretty straight forward, probably a two spanner job on the haynes scale. However, the standard box is very very heavy, so have someone with you under the car to help get it out. Also a pair of circlip pliers is great to open up the exhaust clamps, and make sure the spring bolts are seated properly when putting it back in. Dont try and get the rubbers off on the car, just unbolt them if you can, then some brake cleaner sprayed on the slide them off. Job jobbed. PM my if you have any questions.

johnnyBv8

Original Poster:

2,482 posts

222 months

Monday 16th April 2018
quotequote all
Gingernuts said:
Yep, pretty straight forward, probably a two spanner job on the haynes scale. However, the standard box is very very heavy, so have someone with you under the car to help get it out. Also a pair of circlip pliers is great to open up the exhaust clamps, and make sure the spring bolts are seated properly when putting it back in. Dont try and get the rubbers off on the car, just unbolt them if you can, then some brake cleaner sprayed on the slide them off. Job jobbed. PM my if you have any questions.
Great - thanks very much for this. Is it best to remove the rear diffuser, and would you take the tailpipe finishers off before dropping the exhaust?

PatCub

250 posts

147 months

Monday 16th April 2018
quotequote all
This is the workshop manual procedure, looks fairly straight forward.



johnnyBv8

Original Poster:

2,482 posts

222 months

Monday 16th April 2018
quotequote all
Brilliant - thanks

leerandle

834 posts

138 months

Monday 16th April 2018
quotequote all
I did this myself and mirror some of the comments above, the OEM exhaust is app. 25Kg, therefore, when you remove it, make sure it is properly supported. Sometimes using a jack and rubber pad/piece of wood underneath is enough just to hold it and gently lower.

Some of the bolts between the pipes and back box are a bit of a pain to get too, but nothing a little WD40, wrench and some extenders wont sort. It is generally nuts and bolts, so not a difficult job.

I didn't remove the diffuser or tail pipe finishers. However, if you find that it makes access easier, then why not.

Make sure you get some exhaust paste/gum and use it on any of the joints to aid sealing when fitting the new exhaust.

LordBretSinclair

4,306 posts

208 months

Monday 16th April 2018
quotequote all
Pretty much what everyone else has said - especially the weight of the OEM box - deffo needs supporting or a two man job.

I put this sports box on myself and as long as you take it step by step it's fairly easy - you'll love the noise !!!!!


Gingernuts

553 posts

241 months

Monday 16th April 2018
quotequote all
as above, all can stay on. I did it at the same time as my facelift bumpers so used it as an opportunity to get behind the bumper and clean everything.