Water Wetter where to get this from
Discussion
After another stint sat in London traffic int he TVR last weekend, watching the temp guage creep up and the fans cut in.... I have decided to put some water wetter in to the cooling system.
Does anyone know of the best place to buy this from.
I've see prices from £12 on Ebay to £20 elsewhere.
Does any national chain sell it ?
Does anyone know of the best place to buy this from.
I've see prices from £12 on Ebay to £20 elsewhere.
Does any national chain sell it ?
I would also consider getting a manual override for the fans fitted. That way you can proactively manage the fans. I tend to switch on at about 80 degrees, and it pegs the temp nicely.
This is a very cost effective mod that your dealer or independent TVR specialist should be able to take care of.
For what it's worth, Fernhursts, one of the best independents, told me they noticed zero difference in adding Water Wetter.....enven though WW's website it pretty convincing!
>> Edited by SharkyTVR on Tuesday 26th April 18:13
This is a very cost effective mod that your dealer or independent TVR specialist should be able to take care of.
For what it's worth, Fernhursts, one of the best independents, told me they noticed zero difference in adding Water Wetter.....enven though WW's website it pretty convincing!
>> Edited by SharkyTVR on Tuesday 26th April 18:13
joospeed said:
I need to increase my prices .. 5.25 a bottle plus vat and delivery from me.
Have you noticed the difference when Water Wetter is used ?
I went to your profile here and to your web site and can't find an E-mail adress for you. Certainly interested in a couple of bottles, so get in touch.
Phil
you can still mail me through my profile
I use water wetter a lot .. not for it's better thermal-transfer but because it's great for chasing out air locks. Cerberas in particular are very difficult to bleed through properly, rover v8s less problematical .. but anything you can do to help water do it's job is a good thing IMO.
Getting rid of air locks is an important first step to ensuring your cooling system works properly .. any thermal transfer benefits the water wetter may bring can only help .. but once again i stress that if your cooling system is in good working order you shouldn't be experiencing any problems .. be wary of using water wetter to disguise a failing system .. but I say using it to help you bleed the system is a good use.
I use water wetter a lot .. not for it's better thermal-transfer but because it's great for chasing out air locks. Cerberas in particular are very difficult to bleed through properly, rover v8s less problematical .. but anything you can do to help water do it's job is a good thing IMO.
Getting rid of air locks is an important first step to ensuring your cooling system works properly .. any thermal transfer benefits the water wetter may bring can only help .. but once again i stress that if your cooling system is in good working order you shouldn't be experiencing any problems .. be wary of using water wetter to disguise a failing system .. but I say using it to help you bleed the system is a good use.
yup, the water wetter i use (don't know if it's true of them all) helps lower the surface tension of the water itself .. it flows better and helps discourage a thin boundary layer of air forming on engine internals when you first fill it up .. then as the water pump does it's business it helps chase that air back out to the highest points where you just bleed it off.
for cerberas it's worth it's weight in gold so to speak .. and it's longer term thermal capabilities thereafter can help give you added safety margin for hard working engines.
At a fiver a bottle it's worth getting just for the placebo effect!
for cerberas it's worth it's weight in gold so to speak .. and it's longer term thermal capabilities thereafter can help give you added safety margin for hard working engines.
At a fiver a bottle it's worth getting just for the placebo effect!

Gassing Station | Chimaera | Top of Page | What's New | My Stuff




