DB9 Brake disc set screws
DB9 Brake disc set screws
Author
Discussion

AM11532

Original Poster:

2 posts

105 months

Thursday 26th April 2018
quotequote all
Front brake disc set screws.

As anyone had any issues with these. I took my front wheel off the other day and one of these fell to the floor as I removed the wheel. The other was missing. Having replaced the one screw while I wait for the dealer to decide on whether or not they will send me a new one I note there is slight vibration on the affected side. Not massive shake your fillings out, just a vision issue in the wing mirror. My question is – are these standard parts. Would any M8 set screw from another vehicle be safe to use.

Loose_Cannon

1,602 posts

284 months

Friday 27th April 2018
quotequote all
Once your wheel bolts are tightened up missing disc screws will have no effect. They are just there to stop the disc rotating on the hub when the wheel is off and thus making it hard to find your bolt holes.

I can't remember what the Aston ones are like, most cars are just countersunk phillips head. I usually replace mine with some stainless ones off ebay just to prevent rounding issues in the future. Kays Fasteners have always been good for me; they have a massive range of stainless fixings and you can buy small quantities.

Oops just seen you are in Florida so find another supplier, but yes Ebay is your friend when you want small bags of funny size stainless.

Edited by Loose_Cannon on Friday 27th April 13:35