Are AM brake rotors handed
Are AM brake rotors handed
Author
Discussion

Graze01

Original Poster:

1,203 posts

123 months

Tuesday 1st May 2018
quotequote all
So I bought new rotors from AM dealer for my V8V

I fitted them on the weekend - simple

then tonight I suddenly had the thought should they be handed so the grooves run in a specific orientation to the direction of rotation

the ones I've got were all the same

that means on the drivers side the grooves run "backwards" and on the passenger side they run "forwards"

or is it only the direction of rotation of the vanes inside the rotor that is important?

Other rotors Ive seen (in fact the ones i've got on my TR4 & TR6) are handed so the grooves run the same orientation to the rotation

does this matter at all or is it just one of life's little mysteries

Graeme

Edited by Graze01 on Tuesday 1st May 12:07

steveway

947 posts

115 months

Tuesday 1st May 2018
quotequote all
would have thought they should both run in the same direction

RL17

1,616 posts

124 months

Tuesday 1st May 2018
quotequote all
On my late 16MY V8V they drivers side front and rear the top groove points up and forward whereas the passengers side top groove ones point up and backwards.

dbs2000

2,756 posts

223 months

Tuesday 1st May 2018
quotequote all
The groove direction doesn't matter, it's about the vents on the inside but generally they go the same way so this stands correct


Graze01

Original Poster:

1,203 posts

123 months

Tuesday 1st May 2018
quotequote all
Thanks DBS that's pretty much what I thought

G

telum01

987 posts

146 months

Tuesday 1st May 2018
quotequote all
As above, the standard rotors are non directional. The slots on them will be facing on way on the LH side of the car and the other way on the RH side of the car. The important part are the internal veins. If the veins are directional (as they are in the diagram posted above), then those need to be put on a specific side. The veins in the standard rotors are not directional.