DB9 Headlight Issues
DB9 Headlight Issues
Author
Discussion

Wardaston

Original Poster:

8 posts

103 months

Wednesday 2nd May 2018
quotequote all
Hi Everyone, I am starting this topic to gather information on DB9 headlight issues.
I have experienced several headlight issues with my own DB9 over the past 8 years of ownership:-
1) Fogging (temporarily fixed a couple of times by drying out and adding silica gel bags)
2) Lens deterioration (flecks/tiny cracks in the lens)
3) Washer Mount failures (just experienced for the 3rd time)

I am currently in dialogue with AML on these issues and wish to obtain as much information I can and submit a summary to AML for comment.
Anyone reading this who has experienced or has knowledge of a DB9 headlight problem, please can you post it here or message me with details of the problem, cause (if known) and corrective action to fix (the age or version of unit; last two letters of the part number i.e AA or AE would be useful if known).
I will collate and share findings here if I get a good response.
Many thanks in advance.

DB531

108 posts

178 months

Wednesday 2nd May 2018
quotequote all
For starters,

As the shield where it fitted to the actuator had been repaired (badly see a previous post) prior to my ownership I have no idea why it actually became defective in the first instance.

As for the washer unit headlight mounting points, only one had become defective due to splitting. The vehicle is an 04 plate with 41k miles.
I did notice that the washer securing screws which seem to be of the self threading style were corroded on the section within the plastic as well as the exposed head. Corrosion = expansion = splitting = just a thought.

You do not seem to be signed up to receive PM,s.

Wardaston

Original Poster:

8 posts

103 months

Friday 4th May 2018
quotequote all
DB531 thanks for the input and I have ticked the private message box, so people who would rather not post, can send me info by email.
I include some pictures of my original headlights (style AA) showing the broken pump mountings. I find it hard to believe that AML designed the lamp with Self Tapping Thunderbolt fixings for the pumps and HID ballasts. A threaded brass insert in the plastic would be much more appropriate and almost certainly improve the robustness of the mounting.



Wardaston

Original Poster:

8 posts

103 months

Friday 4th May 2018
quotequote all
My postman just delivered these. I am going to use them to repair my AA headlights.