K1200S oil level briefly too low - put my mind at ease
Discussion
Hi all
I changed the oil in my BMW K1200S today.
I filled up to between the middle and max lines on the inspection tube and took it for a 20 min max spin. Got back and checked the oil again and saw that it had dropped below minimum; I guess I'd overlooked that the oil would need to be drawn through the oil pump etc.
So I topped it up and would estimate that it needed a max of 500 ml to get it up to wear it needed to be. By comparison the maximum volume of oil stated in the manual is 3.5 litres.
So my question is: by riding it for circa 20 mins max with circa 500ml too little oil, will I have done any lasting damage to the bike?
Thanks!
I changed the oil in my BMW K1200S today.
I filled up to between the middle and max lines on the inspection tube and took it for a 20 min max spin. Got back and checked the oil again and saw that it had dropped below minimum; I guess I'd overlooked that the oil would need to be drawn through the oil pump etc.
So I topped it up and would estimate that it needed a max of 500 ml to get it up to wear it needed to be. By comparison the maximum volume of oil stated in the manual is 3.5 litres.
So my question is: by riding it for circa 20 mins max with circa 500ml too little oil, will I have done any lasting damage to the bike?
Thanks!
I can’t remember how to check the oil on a K since my bike went some years ago now. But on my oilheads it says to wait 5 mins after a run before checking. If you check straightaway the oil level will show low on the sight glass, leading to adding more oil which will end up as too much.
Anyway, I’m sure it will be okay as others said.
Anyway, I’m sure it will be okay as others said.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




ked.