Vantage carbon mirror shells
Discussion
Hi All,
Please see the below link
http://www.partsforvolvosonline.com/product_info.p...
Has any one bought and fitted these before?
Just wondering how easy it is to do and what the quaility is like etc?
Any comments welcome
Thanks
Dave
Please see the below link
http://www.partsforvolvosonline.com/product_info.p...
Has any one bought and fitted these before?
Just wondering how easy it is to do and what the quaility is like etc?
Any comments welcome
Thanks
Dave
They're spot on, they really are. And if you YouTube the installation, up pops a video as to how to dismantle and fit without breaking the positioning tabs. The whole unit is a Volvo part so they're made to fit. Don't shout too loud about them though or everyone will buy them. Only thing I did to improve upon them was to give them a good polish, and that was it. Amazing price saving over the Aston ones.
wotnoburgers said:
Hi All,
Please see the below link
http://www.partsforvolvosonline.com/product_info.p...
Has any one bought and fitted these before?
Just wondering how easy it is to do and what the quaility is like etc?
Any comments welcome
Thanks
Dave
Note that they are mirror shells covered with carbon fiber. The glue tends to migrated to the end of the shells and usually thickens the end of the shell. This can make fitting a problem, as the thin end of the shell needs to be inserted into the mirror cap.Please see the below link
http://www.partsforvolvosonline.com/product_info.p...
Has any one bought and fitted these before?
Just wondering how easy it is to do and what the quaility is like etc?
Any comments welcome
Thanks
Dave
dalecan said:
Will these fit a 2012 V8VS?
Cheers.
No 2010 and newer are different. Cheers.
http://astonmartinbits.com/models/5-V8-Vantage/par...
I've seen VERY hit-or-miss quality with these. Not sure if they're the same that I've come across, but I've had both OEM and non-OEM carbon fiber mirror covers come through. The OEM ones are extremely high quality. The non-OEM ones I've seen weren't very good quality at all. They're standard Volvo plastic mirror caps, just like we have on our Astons, but with a carbon fiber cap glued on. The ones I've seen were sloppy, the carbon weave wasn't consistent, and the 'cap' added a bit of thickness to the part that stood out a bit if you looked right at it.
That being said, they're a fraction of the cost of OEM ones, which are very, very expensive. So it comes down to your own man-math.
That being said, they're a fraction of the cost of OEM ones, which are very, very expensive. So it comes down to your own man-math.
The quality is ok on these.
I have a set, but painted the edges black as the show slightly when installed, and had to cut and polish the laquer coat to get a better finish.
However they are CHEAP CHEAP
So cheap I bought a spare set incase they get stolen or fly off at over 100mph.........
I have a set, but painted the edges black as the show slightly when installed, and had to cut and polish the laquer coat to get a better finish.
However they are CHEAP CHEAP
So cheap I bought a spare set incase they get stolen or fly off at over 100mph.........UncleStig said:
They're spot on, they really are. And if you YouTube the installation, up pops a video as to how to dismantle and fit without breaking the positioning tabs. The whole unit is a Volvo part so they're made to fit. Don't shout too loud about them though or everyone will buy them. Only thing I did to improve upon them was to give them a good polish, and that was it. Amazing price saving over the Aston ones.
Do you have a link to the video? I need to take mine off and get them re lacquered.
thanks!
Jibberingloon said:
The quality is ok on these.
I have a set, but painted the edges black as the show slightly when installed, and had to cut and polish the laquer coat to get a better finish.
However they are CHEAP CHEAP
So cheap I bought a spare set incase they get stolen or fly off at over 100mph.........
You go over 100mph... in an Aston...!! I have a set, but painted the edges black as the show slightly when installed, and had to cut and polish the laquer coat to get a better finish.
However they are CHEAP CHEAP
So cheap I bought a spare set incase they get stolen or fly off at over 100mph.........
These mirror caps actually appeared on this forum in May 2015, someone realised that the Volvo mirror cap was the same as the V8 Vantage.
The original person who posted this bought them for £69.99 and I then bought the only other set available for £79.99 (they are still on my car)
About a year after that someone also bought a set, at that time they were up to £99.99. I also bought a spare set when I realised they were available again.
The supplier then realised people buying them were fitting them to Astons and the price jumped up to £119.99.
The Carbon Fibre is fitted over an aftermarket plastic mirror cap and that is why there is variations in quality, if they had perhaps used the OEM Volvo mirror cap then it would have been a better quality item.
Having said all that they are a bargain, even at £119.99 as Aston never produced an OEM CF mirror cap for the earlier smaller mirrors.
The moral of this story is if you are buying parts for your Aston don't tell the Volvo parts supplier they fit an Aston, unless you want to pay more!!
http://www.partsforvolvosonline.com/product_info.p...
They also have some for £72 (slight seconds)
http://www.partsforvolvosonline.com/product_info.p...
The original person who posted this bought them for £69.99 and I then bought the only other set available for £79.99 (they are still on my car)
About a year after that someone also bought a set, at that time they were up to £99.99. I also bought a spare set when I realised they were available again.
The supplier then realised people buying them were fitting them to Astons and the price jumped up to £119.99.
The Carbon Fibre is fitted over an aftermarket plastic mirror cap and that is why there is variations in quality, if they had perhaps used the OEM Volvo mirror cap then it would have been a better quality item.
Having said all that they are a bargain, even at £119.99 as Aston never produced an OEM CF mirror cap for the earlier smaller mirrors.
The moral of this story is if you are buying parts for your Aston don't tell the Volvo parts supplier they fit an Aston, unless you want to pay more!!
http://www.partsforvolvosonline.com/product_info.p...
They also have some for £72 (slight seconds)
http://www.partsforvolvosonline.com/product_info.p...
Edited by Manwhoneverwas on Tuesday 15th May 19:54
Edited by Manwhoneverwas on Tuesday 15th May 20:06
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff



