Lexmoto Hunter 50 TD50Q

[Joe_Cawthorne]

I really want to make my bike louder but the exhaust is one complete unit with a weld on tip. does anyone have any suggestions?

[gusm2]

Cut it off and get a slip on..... Simples

[FiF]

Yes, I have a suggestion, grow up. Want to make it more noisy! FFS!

[Jazoli]

FiF said:

Yes, I have a suggestion, grow up. Want to make it more noisy! FFS!

Not very friendly is it you plank.

I've obviously not grown up, neither have most other folk who I know who ride bikes, this forum is a friendly corner of pistonheads, lets try and keep it that way.

As for you lexmoto OP you'll have to see what aftermarket exhausts are available, not many I'd guess.

Edited by Jazoli on Tuesday 15th May 06:36

[Krikkit]

Know anybody who can weld? Chances are that'd be easy to cut and weld another can on the end for more volume.

[lindrup119]

Cut off existing can with hacksaw
Deburr perfectly cut exposed pipe with old file found in back of shed
Attach new end can (make sure diameter of pipes match before buying) with some exhaust sealant and a jubilee clip (some snips, elbow grease and swearing may also be required)
Fabricate new exhaust mount
Say you'll let it warm up before revving it, but then just decide to rev tits off bike


I am quite clearly not a professional, so don't follow any of these steps.

[anonymous-user]

It's a 50cc Chinese moped.
Please don't.

[FiF]

Mac. said:

It's a 50cc Chinese moped.
Please don't.

Exactly, it's 3bhp, which will then produce 1.5 of its power as noise. Then to be ridden around, judging by the children round here, with binary throttle settings, in a series of throttle twists every few yards, producing a series of irritating farts all while not going very fast, and unfortunately with zero road sense.

If that opinion is considered as being unfriendly and being a plank, so be it. The behaviour of these noisy children is unwanted by a vast majority.

[Joe_Cawthorne]

I don’t want it to be a fart machine. I just want a little bit more noise. If you are just gonna be a ‘plank’ about it then just don’t respond!

[Joe_Cawthorne]

I have just been informed that this ring inside the exhaust might possibly be a restrictor. If it is, how do I remove it?

[crofty1984]

By any sensible measure pissing round with a 50cc moped is pointless and stupid. Do it anyway. Playing with motorbikes is fun.
That thing in the exhaust is probably a restrictor, if it's spot-welded in, see if you can grind at the weeks with a Dremel and knock it out.
A new exhaust silencer is usually a slip/on affair. Whether or not you need to cut your old one off I can't tell you.
You'll probably need to re-jet the carb.

[poo at Paul's]

Get a LeoVinci TT road legal spanny pipe, about £90 delivered. Have it derestricted (grind out washer), stick a bigger jet in it, (ask the ped shop which), then take the variator restrictor out and 45mph, sounds frutity too.