Removing V12 Vantage S front splitter
Removing V12 Vantage S front splitter
Author
Discussion

AMV12S

Original Poster:

7 posts

102 months

Wednesday 23rd May 2018
quotequote all
Hi everyone

New to the forum and ownership so apologies for posting a possibly common question. I have searched but with no luck.

I picked up a new (used) V12 Vantage S roadster on Saturday, what a car!
However, being used to a 4x4 I then proceeded to clout the front Carbon splitter almost immediately! It has made a small amount of damage which I'm told I can get repaired locally (Swansea) but wanted to check whether it's easy to remove the damaged section?

I can see some screws holding the part in place, are there others fixings I can't see that would make it a more difficult job?

Many thanks for any advice.
Adrian

steveway

947 posts

115 months

Wednesday 23rd May 2018
quotequote all
AMV12S said:
Hi everyone

New to the forum and ownership so apologies for posting a possibly common question. I have searched but with no luck.

I picked up a new (used) V12 Vantage S roadster on Saturday, what a car!
However, being used to a 4x4 I then proceeded to clout the front Carbon splitter almost immediately! It has made a small amount of damage which I'm told I can get repaired locally (Swansea) but wanted to check whether it's easy to remove the damaged section?

I can see some screws holding the part in place, are there others fixings I can't see that would make it a more difficult job?

Many thanks for any advice.
Adrian
that's bad news but its so easy to do, have nudged mine but no damage as yet

Vergis

553 posts

273 months

Wednesday 23rd May 2018
quotequote all
Im not sure they can be repaired so easily once the carbon fibre weave has been damaged.

Perhaps find something available on ebay to replace it like for like.

AMV12S

Original Poster:

7 posts

102 months

Wednesday 23rd May 2018
quotequote all
Hi

Yes very frustrating indeed. Hadn't even travelled 500yds from collecting I don't think. Ah well, can't be helped.

I'm assured it can be repaired, at least so it looks better than it does now. It's not awful but I'd still rather try to repair as best I can. There is a used one on eBay now, at nearly £1500 with scratches (albeit under the panel bottom).

So I really just want to be able to get it off so the repairer can have a go at it. Can't be worse than it is now , famous last words!

dbs2000

2,756 posts

223 months

Wednesday 23rd May 2018
quotequote all
https://www.pistonheads.com/gassing/topic.asp?h=0&...

Hopefully something in there to help, shropshire aston's post looks like a nice fix

AMV12S

Original Poster:

7 posts

102 months

Wednesday 23rd May 2018
quotequote all
Hi

Yes very frustrating indeed. Hadn't even travelled 500yds from collecting I don't think. Ah well, can't be helped.

I'm assured it can be repaired, at least so it looks better than it does now. It's not awful but I'd still rather try to repair as best I can. There is a used one on eBay now, at nearly £1500 with scratches (albeit under the panel bottom).

So I really just want to be able to get it off so the repairer can have a go at it. Can't be worse than it is now , famous last words!

leerandle

834 posts

138 months

Wednesday 23rd May 2018
quotequote all
Not sure if this helps.

I've just had the V12 bumpers fitted, so I'm very conscious of now banging it............


AMV12S

Original Poster:

7 posts

102 months

Wednesday 23rd May 2018
quotequote all
Thanks everyone. I think I'll have a more detailed look this eve. as I said, I can see 4 easy screw fixings, I just hope there aren't too many other hidden ones...

philmorton

165 posts

175 months

Wednesday 23rd May 2018
quotequote all
I've dinged mine as well and was intending to send it off to Carbon Fibre Repair over in Daventry

Hadn't had a close look at getting it off yet so will look forward to hear how you got on

AMV12S

Original Poster:

7 posts

102 months

Wednesday 23rd May 2018
quotequote all
Just back from the guy who says he can look at it. He reckons he can do a tidy but not perfect job for £100. Won't notice unless you're looking apparently.

Worth a go I think asnill probably do it again even though I now drive like I've just passed my test.

Just need to remove the splitter now...

AstonV

1,657 posts

137 months

Wednesday 23rd May 2018
quotequote all
You will need to remove the front wheels and inner fenders and air boxes in order to access some of the bolts holding the splitter on.

AMV12S

Original Poster:

7 posts

102 months

Wednesday 23rd May 2018
quotequote all
Thanks everyone. I think I'll have a more detailed look this eve. as I said, I can see 4 easy screw fixings, I just hope there aren't too many other hidden ones...

AMV12S

Original Poster:

7 posts

102 months

Wednesday 23rd May 2018
quotequote all
Thanks AstonV.

A job for soon then...

AstonV

1,657 posts

137 months

Wednesday 23rd May 2018
quotequote all
AMV12S said:
Thanks AstonV.

A job for soon then...
Small hands help.