Aston DBS Exhaust
Author
Discussion

gahbouch

Original Poster:

9 posts

114 months

Friday 1st June 2018
quotequote all
Hello all,

I want to install an exhaust to my DBS. I am considering the Quicksilver supersport silencer, Quicksilver secondary cat delete, and the Larini GTE silencer (which apparently now has a deeper tone vs previously)

I am having a hard time with videos as they do not always mention if the system has standard or sport cats. As for the Larini there is never a mention of GTE system which apparently sounds a lot different to the italian high pitch ones found on youtube.

Does anyone in or around central london have any of these combinations? If so would love to hear it in person near you or if you are going to a meet.

- Standard silencer with QS 200c cats
- QS SS silencer with standard cats
- QS SS silencer with QS 200c cats
- Larini GTE silencer

Also, has anyone noticed a difference between the QS SS in Stainless Steel vs Titanium?

Worth explaining, I like my cars loud but not deafening, without any drone.

Cheers everyone, thanks in advance

Edited by gahbouch on Monday 4th June 16:44

kev1966900

153 posts

110 months

Friday 1st June 2018
quotequote all
Have you considered just fitting the QS secondary decat pipes. All the noise you'll ever need, maybe even a little more BHP and a lot less expensive.

gahbouch

Original Poster:

9 posts

114 months

Friday 1st June 2018
quotequote all
Firstly hi and thank you for taking the time to answer. I am open to anything, the limitless exhaust combinations makes it very hard to make a choice.

Is that what you are running?

I read somewhere that someone has the vanquish s factory decated secondary pipe installed on their v12v

But I can’t find any videos showcasing what that would sound like.

Is there a risk of drone or buzz with removing the secondaries?

kev1966900

153 posts

110 months

Friday 1st June 2018
quotequote all
I'm running a V12V and it has just been fitted with the official Vantage V12 cat replacement kit by my local dealer. The part itself comes from Quicksilver but has an Aston part number (AS572S). No drone so far just extra volume. The part on it's own is £696 and they fitted it FOC as it was in for other work anyway

mib484

27 posts

231 months

Friday 1st June 2018
quotequote all
I have a Quicksilver titanium dbs back box if you decide to go down that route
you can here it with standard cats if you search bamford rose dbs exhaust on google .

Edited by mib484 on Monday 4th June 19:50

gahbouch

Original Poster:

9 posts

114 months

Friday 1st June 2018
quotequote all
kev1966900 said:
I'm running a V12V and it has just been fitted with the official Vantage V12 cat replacement kit by my local dealer. The part itself comes from Quicksilver but has an Aston part number (AS572S). No drone so far just extra volume. The part on it's own is £696 and they fitted it FOC as it was in for other work anyway
That's good to hear about the drone. It also helps that part is approved by Aston. Will be searching for a decatted DBS to hear in person.

Thanks again for your help, much appreciated

gahbouch

Original Poster:

9 posts

114 months

Friday 1st June 2018
quotequote all
mib484 said:
I have a Quicksilver titanium dbs back box if you decide to go down that route pm me for details
Thank you for getting involved. I tried to PM you but it says your link isn't working. Would you be able to PM me first?

The Titanium rear box is currently my favorite option

NeinFondue

860 posts

187 months

Friday 1st June 2018
quotequote all
Good first step would be to go with the secondary decat first, and either install a remote exhaust bypass switch (From Clive CCCharger.co.uk), or pull fuse 22/15. If it is still not loud enough, then you could always replace the back box.

For many, secondary decat and fuse bypass was just right. TBH, the DBS sounds amazing stock, so removal of secondary decats just amplifies that already amazing soundtrack.

gahbouch

Original Poster:

9 posts

114 months

Friday 1st June 2018
quotequote all
NeinFondue said:
Good first step would be to go with the secondary decat first, and either install a remote exhaust bypass switch (From Clive CCCharger.co.uk), or pull fuse 22/15. If it is still not loud enough, then you could always replace the back box.

For many, secondary decat and fuse bypass was just right. TBH, the DBS sounds amazing stock, so removal of secondary decats just amplifies that already amazing soundtrack.
I will likely go for either a secondary decat or quicksilver's supersport silencers. The combination of those 2 seems too loud.

I do like the DBS sound from the factory, I am just looking for something louder (not deafening) and more crisp and peaky. I'm not a huge fan of excessive crackling and popping or general turbulence, I prefer a neater more natural growl with maybe some pops. The standard sound is a bit too washed out, especially at peak rpm where it sounds like it wants to scream a higher pitch but is muffled.

To be honest it's really hard to tell which solution better suits what I am looking for. Different videos of the same setup can sound completely different.

Phil57DBS

208 posts

106 months

Friday 1st June 2018
quotequote all
You have to call Mike at BamfordRose who will perfectly advise you...;)

dbs2000

2,756 posts

223 months

Monday 4th June 2018
quotequote all
As others have said there are a few options. If you want a bit more go then I'd have the primary cats gutted / removed and then high flow secondaries. That'll give you more power and a better sound biggrin

gahbouch

Original Poster:

9 posts

114 months

Monday 4th June 2018
quotequote all
Phil57DBS said:
You have to call Mike at BamfordRose who will perfectly advise you...;)
Bamford seems to have a stellar reputation. U fortunately I didn’t really like the way their final system sounds (primary delete, race secondary) it was a little too high pitched and one dimensional

gahbouch

Original Poster:

9 posts

114 months

Monday 4th June 2018
quotequote all
dbs2000 said:
As others have said there are a few options. If you want a bit more go then I'd have the primary cats gutted / removed and then high flow secondaries. That'll give you more power and a better sound biggrin
Too many options!! That’s what makes this so difficult. More power is not my priority, but more of it is never a bad thing
I’m more interested in getting the sound dialed in