TKO600 Gearbox Mount

[debaron]

Anyone that has fitted a TKO600 gearbox the RV8 - need some help with the gearbox mount.

My measurements make the TKO mount point about 10 cm short of the TVR T5 one.

Any tips?

Thanks

[Engineer1949]

here you go

DSCN2514 by Brundall Motorsport, on Flickr

lots of other picture you can look at that might help with your conversion also words on my thread covering the build up clutch etc. and bellhousing manufacture,

john

Edited by Engineer1949 on Saturday 9th June 07:38

Edited by Engineer1949 on Saturday 9th June 07:40

[debaron]

Engineer1949 said:

here you go


lots of other picture you can look at that might help with your conversion also words on my thread covering the build up clutch etc. and bellhousing manufacture,

john

Top man John, Looks like a slight mod to the existing safety mount which was what I was thinking.

[macdeb]

I did it some time back, easy enough modification of existing mount, I'll try and dig some pictures and measurements out. PS; good move.

[debaron]

macdeb said:

I did it some time back, easy enough modification of existing mount, I'll try and dig some pictures and measurements out. PS; good move.

Thanks fella was hoping you would