Vantage gearbox removal
Vantage gearbox removal
Author
Discussion

BigMig

Original Poster:

205 posts

142 months

Monday 11th June 2018
quotequote all
Hi

Bit of a long shot, but anyone on here have experience of dropping the gearbox (manual) out of the back of a V8 Vantage?
I know it's quite a task to be performing at home, but I have the workshop manual and making good progress.

I'm nearing the point of no return and just wondering how easy it is to access the top set of bolts securing the gearbox to the torque tube? The manual says the whole assembly can be dropped a little to give access to the gear selector cables and bolts, but I'm wondering how much strain does this put on the other end of the torque tube? How far can you drop it?

Also in the chapter referring to rear subframe removal it doesn't mention supporting the transaxle when performing this similar operation, but I'd assume it still essential to do so?

Cheers

Jon39

15,018 posts

174 months

Tuesday 12th June 2018
quotequote all

You are braver than me James, but I am always interested in the mechanicals of AMs.

I think a description with photos as your project progresses, would be much appreciated by the members here.

Presumably you want to do a clutch change. Our American friend Rich, has prepared a few instructional videos about working on his two Vantages. Whether that includes a gearbox removal, I do not know, but might be worth looking.

Best of luck.




telum01

987 posts

146 months

Tuesday 12th June 2018
quotequote all
Someone else sent me this:
http://clivechedzey.wixsite.com/aston/clutch-chang...
Looks pretty comprehensive and well done.
Use at your own risk!

BigMig

Original Poster:

205 posts

142 months

Tuesday 12th June 2018
quotequote all
Thanks for that Rich, just the job.

I'm actually removing the subframe to get it blasted and powder coated, so will probably drop the whole shooting match together, then drop the gearbox out of the frame. But the principals with the torque tube connection remain the same.

So far I've managed to shear about 3 bolts in the process of removing the suspension components. We'll see how much more goes wrong along the way. Shame we have all this nice weather in the UK and the car is looking very sorry for itself on axle stands.