5.1 sound in garage conversion

[voyds9]

Does any body know of a supplier that manufactures a threaded speaker terminal that can be mounted on a cavity wall sunken patrice box, to enable wall sunken cabling between two points in a room.

[dilbert]

I might have got your question a bit wrong so excuse me if I have.

Is the audio feed digital or analogue?

If it's analogue, can't you just drill holes for a pair (or however many) of banana plug receptacles?

I'm certain you can get these from Farnell/RS, but probably maplin too.

[voyds9]

What I'm trying to get is a wall mounted plate like the ariel socket for a TV but with the screw down connectors like the back of a speaker. Mount these in the corners of a room and sink the speker cable into the cavity.

[softwaresorcerer]

voyds9 said:

What I'm trying to get is a wall mounted plate like the ariel socket for a TV but with the screw down connectors like the back of a speaker. Mount these in the corners of a room and sink the speker cable into the cavity.

How about

www.maplin.co.uk/module.aspx?ModuleNo=1077&doy=30m4

or for a shinier job

www.maplin.co.uk/module.aspx?ModuleNo=34718&doy=30m4

[maddog-uk]

Just hit the automation pages and look up the suppliers.


www.letsautomate.com has this sort of stuff ready made
www.laser.com
www.simplyautomate.co.uk/

I made my own, and can send photo's if you want. I used clipsal stuff from letsautomate because my whole house has clipsal sockets and I wanted it to match!

regards

Simon

[voyds9]

maddog-uk said:

Just hit the automation pages and look up the suppliers. www.letsautomate.com has this sort of stuff ready made www.laser.com www.simplyautomate.co.uk/ I made my own, and can send photo's if you want. I used clipsal stuff from letsautomate because my whole house has clipsal sockets and I wanted it to match! regards Simon

Thanx just waht I was looking for