How to check if break pads are worn low
How to check if break pads are worn low
Author
Discussion

Tom_GGG

Original Poster:

81 posts

112 months

Sunday 17th June 2018
quotequote all
I think my break pads may be getting worn low.

Apart from taking the vehicle to the garage is there a way i can tell if they are low or not ?

If they where low would a error come up on the dash ?

The vehicle is an 08 plate (first of the face lifts) v8v.

Jon39

15,017 posts

174 months

Sunday 17th June 2018
quotequote all

If someone here will state the original depth of the friction material, then you can do a visual inspection to estimate the proportion worn.

I can offer you a warning. Don't go anywhere near Kwik Fit. Years ago I called there for a puncture repair. They told me that my brake pads needed to be replaced. Probably thought I knew nothing about cars, but I did happen to know that the pads on that car, were only 25% worn.
Have never been back to them, since that deceipt.







telum01

987 posts

146 months

Monday 18th June 2018
quotequote all
Visual inspection or wait for a warning light. Once the warning light comes on, the brake pad sensor that triggered that warning has to be replaced. Minimum pad thickness per the workshop manual is 2.5mm.