E46 Power Steering Pump Failure
Discussion
So yesterday afternoon my power steering failed on my E46 2000 323ci. No warning of potential failure, or noises from the pump previously. Is there an easy way to confirm its the pump?
ATF reservoir is full, and underneath I cannot see any leaks
Belt is still on and seems to be working correctly
No noises from the pump when turning the steering wheel
I know on the early E46 they have the LUK-LF20 pump's which are know to sheer the drive shafts, but without undoing all the belts can i check this?
Anything else it could be?
ATF reservoir is full, and underneath I cannot see any leaks
Belt is still on and seems to be working correctly
No noises from the pump when turning the steering wheel
I know on the early E46 they have the LUK-LF20 pump's which are know to sheer the drive shafts, but without undoing all the belts can i check this?
Anything else it could be?
Pump went on my 2000 328, as you say the shaft sheared. Faced with the same dilemma I took a flyer and replaced the pump, and job was a goodun. If the pump's working you can usually see some swirling around if you look in the bottle with a torch.
My fluid had a bit of greyness to it after and needed flushing through a couple of times to get rid.
My fluid had a bit of greyness to it after and needed flushing through a couple of times to get rid.
Mine went on a 330ci clubsport 2003... Ordered a replacement from http://acspowersteering.co.uk.
BMW want to replace with the later version which then needs extra pipes/bracket(?) and doesn't feel the same apparently..
BMW want to replace with the later version which then needs extra pipes/bracket(?) and doesn't feel the same apparently..
Gassing Station | BMW General | Top of Page | What's New | My Stuff


