BMW 650 E63 - Code Reader

[Suresurf]

Any one recommend a code reader. I have a Peake one for my old E39 which has the round diagnostic socket under the bonnet. I also have an adapter lead that the more familiar rectangular Plug. Can I use this?

[helix402]

Creator C310 or Carly for BMW app and dongle.

[Suresurf]

Thanks for that. Where is the diagnostic socket. Drivers footwell?

[helix402]

Suresurf said:

Thanks for that. Where is the diagnostic socket. Drivers footwell?

Yes.

[Suresurf]

Hi, I’ve looked and cannot find the diagnostic socket in the footwell. It must be well hidden?

[Prinny]

It’s behind a latched flap on the ‘roof’ of the footwell, approximately in line with the right hand side of the steering wheel. If you feel around, you’ll get the flap. It’s longitudinal in alignment with the car direction, and hinges away from you, ie to the front. It does take a little effort to open, (not force, if you see what I mean...)

Once there, it’s an obd2 port.

Many code readers/applications are available, I’ve got Carly (ok), Foxwell nt510 (iirc) & I’ve got a copy of ncs expert/inpa on a laptop too (best).

If you just want to read codes, a generic obd2 reader will get the basics, but not everything (i.e. BMW specific codes won’t be on a generic reader). If you’re looking to do some simple coding, Carly can work, but is limited in scope.

If you’re anywhere near N Manchester & aren’t in a particular hurry to do it (I’m away with work atm), pm me if you want.

[Suresurf]

That’s great. Thanks I will look tonight. I have a generic reader so will try that first.

Thanks for your kind offer, but I’m on the South Coast.