Worth Upgrading Old Macbook Pro?
Worth Upgrading Old Macbook Pro?
Author
Discussion

Progressive

Original Poster:

1,288 posts

220 months

Thursday 23rd August 2018
quotequote all
I have a mid-2010 Macbook Pro. The specs are:

13" aluminium body.
2.4 GHz Intel Core 2 Duo.
4 GB.
500gb hard drive (not SSD).

Its used at home as the primary machine for light activity such as browsing, photo storage, basic word processing, streaming nextflix. It doesn't owe me anything and has been a great machine. It has slowed down significantly, particularly start-up speed and processing times. It still works though, although I fear it may die at any time. I have moved my large iTunes library off it and onto an external (backed up) now I rely on streaming services pretty much 100%.

So is it worth upgrading this now old machine or should I spend £1,500 a current Macbook Pro? Views?

gregs656

12,441 posts

212 months

Thursday 23rd August 2018
quotequote all
I’d split the difference and go for a 2015 m/y one.

audi321

6,204 posts

244 months

Thursday 23rd August 2018
quotequote all
Shouldn't have slowed down that much on start-up. See what is set to load on start-up and see if that's the problem.

Other than that, stick in an SSD and you'll have a new machine! I have a 2010 one, and my wife uses it for general use without problem. I certainly wouldn't buy a new one for the sake of it.

8 year old macbook - they're good for another 5 years yet I'd say!

rich888

2,610 posts

230 months

Thursday 23rd August 2018
quotequote all
Plenty of life in it yet, though the original HDD may be on the way out which is why it's slowing down.

First off, before you do anything make sure you have made a recent external copy onto Time Machine which you should be doing anyway. You can also clone the drive using Super Duper or Carbon Copy Cloner, and I am also led to believe (having watched the YouTube video), that you can clone the internal drive onto an external drive using Disk Utility.

It's very easy to change the HDD on the MacBook Pro of your era, probably an easy 20 minute job. Power it down, unplug it, flip it over and take all the screws out paying particular attention as to which of the different length screws go where. Once the back plate is off you can see the HDD to change it. There are plenty of YouTube videos showing how to do it. Is probably a 3/10 for difficulty.

I've changed the HDD on mine twice so far and the next time I do it will be fitting in a SSD in if the prices have dropped sufficiently for the size of drive I want to fit which will be 1TB or more.

Hope this helps...

EDITED TO ADD: I assume you run Disk Utility occasionally if you're running an older OS because that tends to speed things up a bit. Most folks don't even know it exists let alone use it.

Edited by rich888 on Thursday 23 August 22:32

AJB88

16,021 posts

202 months

Friday 24th August 2018
quotequote all
I have the same model, I fitted 8gb and Samsung SSD and it runs a lot quicker!

Only issue now is, Apple have stopped OS updates for it as of the most recent version.

Previously my MBP 2010 would take around 2 minutes to boot, does it in about 20 seconds now.

Edited by AJB88 on Friday 24th August 06:43

Progressive

Original Poster:

1,288 posts

220 months

Friday 24th August 2018
quotequote all
All very helpful, thanks very much.

I think I'll back it up then attempt an SSD install in the next couple of months, when I have some time.

Will report back with how badly its gone!

AJB88

16,021 posts

202 months

Friday 24th August 2018
quotequote all
I literally used a USB cable to clone my HDD to SSD, swapped them over and booted.

When I did this thought we had just done a clean install (to try speed it up) so it was all clean.

Du1point8

22,987 posts

223 months

Friday 24th August 2018
quotequote all
I have a 2011 macbook pro.

Its spec is:

2x SSD (1 to replace the HD and one in place of the supadrive)
new battery
upgrade of the data cable to make sure there is no wear.
16GB RAM

It flies now