Bring back the beige!
Discussion
I've recently gone through a mini mid life crisis and tried to build a windows 98 machine for retro gaming, I had one circa age 17-20 and it was a happy time of my life.
I can't believe how hard it's been, I thought have a look through ebay and the various small ads and people will be falling over themselves to sell old worthless machines, sadly it seems 99% plus have ended up in landfill and those that are left are incredibly hard to find or being sold for a lot of money due to retro tax!
Now I did say a windows 98 machine....... As in one.
It started with a windows xp dell which I thought simple fdisk, load win 98, download drivers for win 98 and off we go, athlon xp 3200 far faster than the little t-bird 900 I started out with! Motherboard failed.
Then I bought a job lot of machines from Leeds. To get one machine out of them, a mesh which I could see had a separate graphics and sound card and the sound card had a nice soundblaster front controller. Turned out it was a nice little machine but was a bit slow. Typical Ebay job lot listing was a total gamble. Nearly there but not quite. But on the positive side lots of other machines I could build up in to windows 98 retro computers for otheridiots enthusiasts like myself. 2 machines out of this lot died on start up so joined the scrap pile. One sold a week ago. Im left with about half a dozen others...... I'm now starting to get in to trouble.
Fast forward a few weeks, I really need a decent monitor (not to mention keyboard and mouse), so start looking for my teenage monitor, the mighty Dell Trinitron in 17 or 19" variety. Everywhere we go I'm looking at local ads, facebook stuff for sale and ebay, we end up having lunch at Castleford and I find someone doing another clearance, go and have a look, long story short come away with 3 monitors and another pc......
It was a frosty drive home.
The PC this time also having a nice Soundblaster in it is a top of the line Dell tower, which also dies within seconds of start up. It's just a fact of life with old electronics, I'm sure if I could be bothered I could track the motherboard and find which capacitors have died but lifes too short and although the case is wonderful the actual motherboard and processor are very average. A plan is hatching.
All through this process a couple of youtubers have been a great help (or bad influence depending who in our house you speak to). Lazygame reviews and Phils computer lab. Phils showed a motherboard that is brand new, uses socket 775 processors and has an agp slot and drivers for windows 98! Perfect. One crops up on ebay with memory and processor. I buy it.
At this point even I'm questioning my sanity I went in to this expecting to spend around £20. I reckon I'm the thick end of a couple of hundred. Less the £45 I sold a machine for the other day.
Well it works, I changed the memory re thermal pasted the cpu, stuck one of my nice soundblasters and a geforce fx5200 in and it flies. Mechanically I am now sorted.
But the case. It's one I gutted a working machine out of just because it was about the best case I had, but it's not lovely, it's a typical cheap and cheerful period case, I gave it the cleaning of it's life and it's very clean now but it wasn't lovely when new and hasn't matured like a fine wine. But that Dell XPS on the other hand is very lovely. Seriously over complicated case, it's like a puzzle to open with the side sliding off then the foot then the top before the other side..... You get the picture. Even has a zip drive!
So the next move is going to be to house the new motherboard in this case with a new PSU and try to build the "final" iteration. I have a couple of stumbling blocks, notably I want a 3.5" drive bay USB adaptor in white or ideally beige, you literally cannot get them, never mind from the likes of overclockers or ebuyer not even on ebay. Loads in black and a few in silver but none in lovely old beige.
A bigger issue is the motherboard mounting to the case. Typically dell the motherboard is meant to be mounted on some clever clips rather than the standard stand offs everyone else uses. of course a couple are missing and they are a horrible design that may have helped short out and kill the old board too. So next job is to engineer a solution to mount standard type standoffs in to the square holes left by the Dell ones. And of course the IO shield hole isn't standard size.... Of course. On the positive side it's the right width and I think with a little trim on the top a standard IO shield will fit in.
Oh and the power switch/reset switch wiring is all unique to Dell too. That's an easy fix I'm waiting on some flying leads which I'll solder to the little dell circuit board on the front panel and it's done.
Is it all worth it. Probably not. But it's been fun so far at least. And at least I have some tasteful Beige back in my life.
I can't believe how hard it's been, I thought have a look through ebay and the various small ads and people will be falling over themselves to sell old worthless machines, sadly it seems 99% plus have ended up in landfill and those that are left are incredibly hard to find or being sold for a lot of money due to retro tax!
Now I did say a windows 98 machine....... As in one.
It started with a windows xp dell which I thought simple fdisk, load win 98, download drivers for win 98 and off we go, athlon xp 3200 far faster than the little t-bird 900 I started out with! Motherboard failed.
Then I bought a job lot of machines from Leeds. To get one machine out of them, a mesh which I could see had a separate graphics and sound card and the sound card had a nice soundblaster front controller. Turned out it was a nice little machine but was a bit slow. Typical Ebay job lot listing was a total gamble. Nearly there but not quite. But on the positive side lots of other machines I could build up in to windows 98 retro computers for other
Fast forward a few weeks, I really need a decent monitor (not to mention keyboard and mouse), so start looking for my teenage monitor, the mighty Dell Trinitron in 17 or 19" variety. Everywhere we go I'm looking at local ads, facebook stuff for sale and ebay, we end up having lunch at Castleford and I find someone doing another clearance, go and have a look, long story short come away with 3 monitors and another pc......
It was a frosty drive home.
The PC this time also having a nice Soundblaster in it is a top of the line Dell tower, which also dies within seconds of start up. It's just a fact of life with old electronics, I'm sure if I could be bothered I could track the motherboard and find which capacitors have died but lifes too short and although the case is wonderful the actual motherboard and processor are very average. A plan is hatching.
All through this process a couple of youtubers have been a great help (or bad influence depending who in our house you speak to). Lazygame reviews and Phils computer lab. Phils showed a motherboard that is brand new, uses socket 775 processors and has an agp slot and drivers for windows 98! Perfect. One crops up on ebay with memory and processor. I buy it.
At this point even I'm questioning my sanity I went in to this expecting to spend around £20. I reckon I'm the thick end of a couple of hundred. Less the £45 I sold a machine for the other day.
Well it works, I changed the memory re thermal pasted the cpu, stuck one of my nice soundblasters and a geforce fx5200 in and it flies. Mechanically I am now sorted.
But the case. It's one I gutted a working machine out of just because it was about the best case I had, but it's not lovely, it's a typical cheap and cheerful period case, I gave it the cleaning of it's life and it's very clean now but it wasn't lovely when new and hasn't matured like a fine wine. But that Dell XPS on the other hand is very lovely. Seriously over complicated case, it's like a puzzle to open with the side sliding off then the foot then the top before the other side..... You get the picture. Even has a zip drive!
So the next move is going to be to house the new motherboard in this case with a new PSU and try to build the "final" iteration. I have a couple of stumbling blocks, notably I want a 3.5" drive bay USB adaptor in white or ideally beige, you literally cannot get them, never mind from the likes of overclockers or ebuyer not even on ebay. Loads in black and a few in silver but none in lovely old beige.
A bigger issue is the motherboard mounting to the case. Typically dell the motherboard is meant to be mounted on some clever clips rather than the standard stand offs everyone else uses. of course a couple are missing and they are a horrible design that may have helped short out and kill the old board too. So next job is to engineer a solution to mount standard type standoffs in to the square holes left by the Dell ones. And of course the IO shield hole isn't standard size.... Of course. On the positive side it's the right width and I think with a little trim on the top a standard IO shield will fit in.
Oh and the power switch/reset switch wiring is all unique to Dell too. That's an easy fix I'm waiting on some flying leads which I'll solder to the little dell circuit board on the front panel and it's done.
Is it all worth it. Probably not. But it's been fun so far at least. And at least I have some tasteful Beige back in my life.
Really not the same.
It's the same argument as emulators for any other machines, using period controls and on pcs using a CRT monitor makes gameplay so drastically different to using a modern wide-screen LCD it takes all the fun out of it. By the same token I probably don't need more than a 50hp shopping car either but doesn't stop me liking my classics and quick stuff.
It's the same argument as emulators for any other machines, using period controls and on pcs using a CRT monitor makes gameplay so drastically different to using a modern wide-screen LCD it takes all the fun out of it. By the same token I probably don't need more than a 50hp shopping car either but doesn't stop me liking my classics and quick stuff.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


