Budget painting with compressor... Sourcing paint?
Discussion
I've recently acquired a 24l compressor and a, horribly cheap, spray gun.
I wanted to have a bash at spraying a front mudguard on my crap old Honda to test it, but sourcing the paint seems to be quite pricey. RS paints for example want about £80 for the paint, base coat, and lacquer. That's before I buy stuff like spirits and bits for rubbing it down.
But for £100 I could just pay someone to do it properly, and for £30 I could just use rattle cans which also seems easier...
Is there a cheaper way to source small amounts of paint?
Or is using a compressor to paint in this way just not the way to do smaller jobs?
Cheers,
PP
I wanted to have a bash at spraying a front mudguard on my crap old Honda to test it, but sourcing the paint seems to be quite pricey. RS paints for example want about £80 for the paint, base coat, and lacquer. That's before I buy stuff like spirits and bits for rubbing it down.
But for £100 I could just pay someone to do it properly, and for £30 I could just use rattle cans which also seems easier...
Is there a cheaper way to source small amounts of paint?
Or is using a compressor to paint in this way just not the way to do smaller jobs?
Cheers,
PP
Prof Prolapse said:
Unless you've a more specific suggestion, I've tried both and couldn't find anything.
Car spares in Cheshunt have always done me well2 minutes on eBay:
https://www.ebay.co.uk/itm/Cellulose-Car-Paint-Glo...
https://www.ebay.co.uk/itm/500-ML-READY-FOR-USE-CE...
https://www.ebay.co.uk/itm/1-Lt-RFU-Cellulose-Clea...
£37 and more than enough for a mudguard, much better than the £80 quoted in the OP
Edited by AceOfHearts on Thursday 30th August 14:25
Yep, small auto paint factor is what you need - I have bought 0.25 litre pots from my my local one for car touch ups and small repairs. Can't remember how much but I think less than £20.
You'll need thinners and lacquer, yes, but if you keep those properly sealed then they will last a fair while for the next job.
You'll need thinners and lacquer, yes, but if you keep those properly sealed then they will last a fair while for the next job.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



