Chimaera won't start
Discussion
Hello all,
Bit of advice needed please...........
The fob doesn't lock or unlock the doors.
Tried using the 'push in' thingy to switch off the immobiliser.
Ignition light and oil pressure light come on when the key is turned but the fuel pump doesn't prime and the solenoid doesn't click.
I've tried the following:
Changed the batteries in the fob.
Changed the ignition and fuel pump relays.
Pressed the inertia switch.
Disconnected the battery for 15 minutes or so to see if the immobiliser resets.
I'm suspecting it could be a knackered immobiliser.
Any suggestions would be most appreciated.
Many thanks
Steve.
Bit of advice needed please...........
The fob doesn't lock or unlock the doors.
Tried using the 'push in' thingy to switch off the immobiliser.
Ignition light and oil pressure light come on when the key is turned but the fuel pump doesn't prime and the solenoid doesn't click.
I've tried the following:
Changed the batteries in the fob.
Changed the ignition and fuel pump relays.
Pressed the inertia switch.
Disconnected the battery for 15 minutes or so to see if the immobiliser resets.
I'm suspecting it could be a knackered immobiliser.
Any suggestions would be most appreciated.
Many thanks

Steve.
Belle427 said:
Fuse 6 is listed as for the alarm, a long shot but check it first.
Sounds as if another meta alarm has bitten the dust, Dave will be here shortly with his easy to follow bypass instructions !
Fuse 6 does the door locking.Sounds as if another meta alarm has bitten the dust, Dave will be here shortly with his easy to follow bypass instructions !
Fuses 12 and 13 do the immobiliser. 12 is ignition switched, 13 is permanent +12v.
Steve
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


