TerraMaster D5-300C USB Disk Enclosure - anyone used one?
Discussion
I currently have a load of externals hanging off a hub which seem to have multiplied over time and all of which are in varying states of 'fullness'. I've been looking for a solution which would allow me to break them out of their caddies and group them into a proper 'NAS'-style enclosure with proper cooling etc. It would probably also help to reduce down the number of USB connections required as well as boosting them all to 3.0.
I've come across the TerraMaster D5-300C which seems to be broadly well-reviewed: https://www.terra-master.com/uk/d5-300c.html
A couple of these will allow me to put the disks straight into the unit without having to format or RAID them (whilst it would be a mild inconvenience, I'm not too fussed about losing a disk and I tend to keep an eye on their health anyway). It would also allow me to maintain their separate drive mapping which would be useful.
Has anyone else used one or can anyone recommend something else similar?
I've come across the TerraMaster D5-300C which seems to be broadly well-reviewed: https://www.terra-master.com/uk/d5-300c.html
A couple of these will allow me to put the disks straight into the unit without having to format or RAID them (whilst it would be a mild inconvenience, I'm not too fussed about losing a disk and I tend to keep an eye on their health anyway). It would also allow me to maintain their separate drive mapping which would be useful.
Has anyone else used one or can anyone recommend something else similar?
They're £330 a pop and you want 2? For £660 I'd be buying a server and running a copy of Unraid on it. Significantly more flexible and better cooling options than an enclosure. Or if you really want to stick to enclosures compare carefully with offerings from Synology and QNap who tend to be the most recommended in this mid-market segment.
Cheers, I'm well aware of Synology and Qnap; the issue with those solutions (certainly the Synology) is that the disks need formatting prior to use with them - I want to be able to transplant from individual caddies to a single enclosure (or two) where the disks will still present back as individual drives without any requirement to format them or lose data. They're all different sizes anyway (2-8Tb) so RAID isn't even a consideration.
I suppose I could build a cheap PC to put the disks in but I wanted to avoid that if possible for noise reasons (also I have 10 externals and not many PC cases will take that many). These caddies are very quiet and will mean I can crack open the existing externals, pop the disks in and Bob's your uncle... They're also only £220 on Amazon which isn't so bad. I was just checking here if anyone has used one or had another alternative.
I suppose I could build a cheap PC to put the disks in but I wanted to avoid that if possible for noise reasons (also I have 10 externals and not many PC cases will take that many). These caddies are very quiet and will mean I can crack open the existing externals, pop the disks in and Bob's your uncle... They're also only £220 on Amazon which isn't so bad. I was just checking here if anyone has used one or had another alternative.
Edited by Funk on Monday 3rd September 16:35
I can’t say I’ve used that enclosure but I did use a four disk JBOD enclosure by Icydock I think and it gave me no end of trouble over USB3 although it was a bit better over eSATA. I moved to putting my 12 disks into a Fractal R2 XL with a decent quality power supply and low power CPU/mobo combination and have never looked back. It is practically silent but obviously a bit more than the enclosure you’re looking at. Not by much though - by the time I bought all the Sata cables and accessories I think I spent under £500 excluding the disks themselves.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


