My ‘09 M6 doesn’t work if heated up.

[TheGuyInTheBox]

Hello guys my car run very well if the engine cold but after engine heated up it starts strugling to idle or shut down himself after engine colds down. İf engine reach its running temp. it show up a error message like “Engine fault. Reduced power. “ and engine starts “cough” and doesn’t pass 2k rpm if I keep giving gas car starst to shake forward and backward like a boat. I bought the car like 8 months ago and it always like that. ( sorry for my bad english im from Turkey. )

[gun12b]

scan it with fault code reader, look on YouTube.

[Schermerhorn]

TheGuyInTheBox said:

Hello guys my car run very well if the engine cold but after engine heated up it starts strugling to idle or shut down himself after engine colds down. ?f engine reach its running temp. it show up a error message like “Engine fault. Reduced power. “ and engine starts “cough” and doesn’t pass 2k rpm if I keep giving gas car starst to shake forward and backward like a boat. I bought the car like 8 months ago and it always like that. ( sorry for my bad english im from Turkey. )

Your car is overheating and the ECU is putting the car into a limp mode.

Change your cooling fan and thermostat. I had the same issue and once I changed the fan and thermostat, the issue never came back.

I don't know how easy it is to get parts in Turkey now though.

However, before doing anything please scan the car for faults on the OBD2 port.

[TheGuyInTheBox]

Hello again boys. I scanned the vehicle via BlueDriver and the codes are ;
P000D
P000B
P0175
P0014
P0017
P0365
P0024
P0390
these are the codes.
And can u explain me what is the limp mode actually?

Edited by TheGuyInTheBox on Monday 10th September 17:15