Ordering BT superfast fibre
Author
Discussion

Halb

Original Poster:

53,012 posts

214 months

Tuesday 11th September 2018
quotequote all
Just been on the blower to the sales team, enquiring about BT superfast fibre, email given. If I wait a bit, will I get an offer soonish?
Anyone any experience of this?

Also, they mentioned two speeds, one a router in the post, install myself, I'; get xyz speed. Another speed (extra tenner a month) around 10mb more speed, if it's installed by an engineer.

Bobhon

1,059 posts

210 months

Tuesday 11th September 2018
quotequote all
I just had the Engineer option installed a couple of weeks ago. He had to run a new fibre (?) cable from the pole in the road to the house and we got 50mb connection.
Speaking with our new neighbours (we only moved in 3 weeks ago) they are on the old copper cable and they get a tremendous 3mb on a very good day, usually 1.7mb tops.

So I would definitely go for the faster Engineer install.

Halb

Original Poster:

53,012 posts

214 months

Tuesday 11th September 2018
quotequote all
Bobhon said:
I just had the Engineer option installed a couple of weeks ago. He had to run a new fibre (?) cable from the pole in the road to the house and we got 50mb connection.
Speaking with our new neighbours (we only moved in 3 weeks ago) they are on the old copper cable and they get a tremendous 3mb on a very good day, usually 1.7mb tops.

So I would definitely go for the faster Engineer install.
whooa, that seems weird. THe (circa) £20 p/m option has speeds quoted of 52 –77 meg (the engineer install is something like 70-90). They'd have to ensure minimum speed of 52, right?

MintyScot

848 posts

223 months

Tuesday 11th September 2018
quotequote all
Its all about minimal guarantees. Its still the same line, circuit and equipment etc. Engineer installed or not you could get the same speed. The engineer installed products are usually higher end so you get more stuff bundled in with it (hence the higher cost), including an engineer who will install and demonstrate the working connection and hopefully make sure you get your minimum guaranteed speeds.

Deep Thought

40,169 posts

228 months

Tuesday 11th September 2018
quotequote all
Bobhon said:
I just had the Engineer option installed a couple of weeks ago. He had to run a new fibre (?) cable from the pole in the road to the house and we got 50mb connection.
Speaking with our new neighbours (we only moved in 3 weeks ago) they are on the old copper cable and they get a tremendous 3mb on a very good day, usually 1.7mb tops.

So I would definitely go for the faster Engineer install.
But are they paying for the Superfast Fibre Broadband option, as opposed to regular BT Broadband?

untakenname

5,373 posts

223 months

Tuesday 11th September 2018
quotequote all
Had 'Fibre Unlimited' installed last week with Plusnet, I chose them over BT for this caveat, they give you a guaranteed minimum download speed or the right to cancel:


If we can't provide a speed equal to or better than the minimum guaranteed access line speed, you should contact our support team and we'll work with you to try and get the matter resolved. If the fault can't be resolved, you'll be able to end your contract without charge.


My guaranteed download speed was 63mbps but I'm only getting 55mbps so I can cancel without any fees, tbh I just want them to sort it as it's only £27 per month including line rental and also get £100 cashback which saves around £200 per year compared to BT.

This is my line report if anyone wants to compare it to their own


Halb

Original Poster:

53,012 posts

214 months

Tuesday 11th September 2018
quotequote all
untakenname said:
This is my line report if anyone wants to compare it to their own
Nice, so your copper wire bit from cabinet to house is 400 metres?

Halb

Original Poster:

53,012 posts

214 months

Tuesday 11th September 2018
quotequote all
MintyScot said:
Its all about minimal guarantees. Its still the same line, circuit and equipment etc. Engineer installed or not you could get the same speed. The engineer installed products are usually higher end so you get more stuff bundled in with it (hence the higher cost), including an engineer who will install and demonstrate the working connection and hopefully make sure you get your minimum guaranteed speeds.
Right, as I guessed/surmised, but salespeople are tricksy sorts. I've got the email from them...I'm gonna give it some time to see if an 'offer' follows up.

VEX

5,259 posts

277 months

Wednesday 12th September 2018
quotequote all
Bobhon said:
I just had the Engineer option installed a couple of weeks ago. He had to run a new fibre (?) cable from the pole in the road to the house and we got 50mb connection.
Speaking with our new neighbours (we only moved in 3 weeks ago) they are on the old copper cable and they get a tremendous 3mb on a very good day, usually 1.7mb tops.

So I would definitely go for the faster Engineer install.
It will still be Copper, it is highly un-likely to be Fibre without being in a special area or with specialist hardware in your house.

I wasnt aware of INFINITY2 being able to run at anything above 78mbps - we are about 100m from the village cabinet and we max out at 78mbps.

V.

untakenname

5,373 posts

223 months

Wednesday 12th September 2018
quotequote all
Edit: Have noticed on the plusnet page for their Fibre Extra that they have recently (within the past month) relabeled their BB from 'upto 80mb' to 'average speed 66mb'.
imo unless you are also into the BT sport packages that are bundled there's little reason to use BT as the provider as they are more expensive than the other providers due to having to pay for the football viewing rights.


Halb said:
Nice, so your copper wire bit from cabinet to house is 400 metres?
Around that distance, the cabinet is about 250 meters away but the route the cable takes is really convoluted going along the whole building before going back on itself and into it, I've had a call from Plusnet and hopefully the engineer will be able to reduce the length of the run.

I can cope with 50mbps down but it's still a noticeable difference coming from my last place where I had 200mbps (Virgin, they offered me a free upgrade to 350mb when I said I was leaving).


Halb

Original Poster:

53,012 posts

214 months

Wednesday 12th September 2018
quotequote all
VEX said:
It will still be Copper, it is highly un-likely to be Fibre without being in a special area or with specialist hardware in your house.
I wasnt aware of INFINITY2 being able to run at anything above 78mbps - we are about 100m from the village cabinet and we max out at 78mbps.
Hmm, so possibly the extra tenner a month for two years was to use some more fibre? It's a small hamlet, with maybe ten houses, we've only just got our own lil cabinet, after years of 500k speed on the wire (I actually use nospot 4g broadband currently), but there were some new builds, with underground connections, I guess they could have fttp.

untakenname said:
Around that distance, the cabinet is about 250 meters away but the route the cable takes is really convoluted going along the whole building before going back on itself and into it, I've had a call from Plusnet and hopefully the engineer will be able to reduce the length of the run.
I can cope with 50mbps down but it's still a noticeable difference coming from my last place where I had 200mbps (Virgin, they offered me a free upgrade to 350mb when I said I was leaving).
I think straight line, we may be 200 metres, possibly 300 by connection, difficult to see, not sure where the wires comeout of the ground.

MrBarry123

6,109 posts

152 months

Wednesday 12th September 2018
quotequote all
OP - as has been mentioned, I very much doubt the extra cost in your example is for an upgrade to what would be FTTP.

We’ve just bought a new house and have the same option as you i.e. pay £10 more per month and get a slight uplift in speed, however both options are using FTTC and therefore only offer copper connections into the house.

Halb

Original Poster:

53,012 posts

214 months

Wednesday 12th September 2018
quotequote all
Thanks.
erm, yeah, looks like it is possible to get above 78 on fttc. I may do some rough calculations later (walk the line route)

I'm not really fussed either way, currently on 20mb dl on EE (on a good day, quick test right now puts it at 11. biggrin), so it's all manna from heaven for me.
https://www.thinkbroadband.com/guides/fibre-fttc-f...
100m 100 Mbps 25 Mbps 5%
150m 80 Mbps 20 Mbps 10%
200m 65 Mbps 18 Mbps 20%
300m 45 Mbps 17 Mbps 30%
400m 42 Mbps 16 Mbps 45%

Derek Smith

50,032 posts

279 months

Wednesday 12th September 2018
quotequote all
I do a lot of video work, both downloading and uploading. The files are big - two views of a whole rugby match - and I got fibre to speed things up a bit.

I've been well pleased with BT. Uploading used to be an overnight job, and now is over in under an hour. Downloading is obviously much faster.

I used to check speeds and such, but now can't really be bothered. It's remarkably fast.


Bobhon

1,059 posts

210 months

Wednesday 12th September 2018
quotequote all
VEX said:
Bobhon said:
I just had the Engineer option installed a couple of weeks ago. He had to run a new fibre (?) cable from the pole in the road to the house and we got 50mb connection.
Speaking with our new neighbours (we only moved in 3 weeks ago) they are on the old copper cable and they get a tremendous 3mb on a very good day, usually 1.7mb tops.

So I would definitely go for the faster Engineer install.
It will still be Copper, it is highly un-likely to be Fibre without being in a special area or with specialist hardware in your house.

I wasnt aware of INFINITY2 being able to run at anything above 78mbps - we are about 100m from the village cabinet and we max out at 78mbps.

V.
Could well still still be copper to the house. All I know is that the engineer ran a new cable from a separate set of connections on the pole across to our house.


I have a white box on the wall in the study where the new cable terminates that is about 300mm X 300mm (12" × 12" if you're my age).

All I know is that I'm glad that I'm getting 50mb rather than 1.7.

Halb

Original Poster:

53,012 posts

214 months

Thursday 13th September 2018
quotequote all
The cabinet runs a connection to a main pole, where all the wires for the village stem off, what is that bit called? And is it copper wire to the pole bit?

Halb

Original Poster:

53,012 posts

214 months

Sunday 7th October 2018
quotequote all
well the month is up next week and still no offer. biggrin