Remote access to a PC
Discussion
Okay, we have a number of desktops one of which is has a programme that is vital to the company, that's fine but the PC it sits on is quite often being used and I access it via Teamviewer when it's not being used. I've got a new PC coming which will be used for said programme. I need remote access to this PC, of course I can use Teamviewer but I'd like to access it when I'm away from base, particularly at home in the evening but that would require the host computer to be live and the code generated (or am I wrong on that?).
I've Googled various things but it's not really making sense or it's software being flogged. If anyone can shed some light on how to move forward it would be much appreciated!
I've Googled various things but it's not really making sense or it's software being flogged. If anyone can shed some light on how to move forward it would be much appreciated!
Heartworm said:
Are you looking to remotely power the machine on?
Teamviewer can be set with a fixed address /password that will anyways work and not change on a restart
I was presuming if I was to use Teamviewer then the PC would need to be left on. I have been reading about Wake on Lan but it seems to be quite tricky to get right?Teamviewer can be set with a fixed address /password that will anyways work and not change on a restart
I've seen the 'unattended access' on Teamviewer settings but again presumed this would need the PC to be powered on.
I have a Teamviewer corporate account with about 40 computers around the world, it's hit or miss and down to the individual motherboard model as to whether wake on lan by magic packet will work.
The secondary solution I came up with is the following:
Change the settings in the bios so that state after power loss is set to always on. Then buy a Wi-Fi socket and plug the computer into this. If the computer is switched off, turn the socket off then on again remotely and as soon as the PC detects power it will boot up and allow you to log in via teamviewer.
On the computer in question, make sure you setup in teamviewer that is ready for unattended access and set your own password.
The secondary solution I came up with is the following:
Change the settings in the bios so that state after power loss is set to always on. Then buy a Wi-Fi socket and plug the computer into this. If the computer is switched off, turn the socket off then on again remotely and as soon as the PC detects power it will boot up and allow you to log in via teamviewer.
On the computer in question, make sure you setup in teamviewer that is ready for unattended access and set your own password.
roverspeed said:
I have a Teamviewer corporate account with about 40 computers around the world, it's hit or miss and down to the individual motherboard model as to whether wake on lan by magic packet will work.
The secondary solution I came up with is the following:
Change the settings in the bios so that state after power loss is set to always on. Then buy a Wi-Fi socket and plug the computer into this. If the computer is switched off, turn the socket off then on again remotely and as soon as the PC detects power it will boot up and allow you to log in via teamviewer.
On the computer in question, make sure you setup in teamviewer that is ready for unattended access and set your own password.
I like that solution! think that might be the way, thanks.The secondary solution I came up with is the following:
Change the settings in the bios so that state after power loss is set to always on. Then buy a Wi-Fi socket and plug the computer into this. If the computer is switched off, turn the socket off then on again remotely and as soon as the PC detects power it will boot up and allow you to log in via teamviewer.
On the computer in question, make sure you setup in teamviewer that is ready for unattended access and set your own password.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


