dash leather unsticking
dash leather unsticking
Author
Discussion

scorcher

Original Poster:

4,122 posts

263 months

Saturday 7th May 2005
quotequote all
Anybody recommend some glue to stick the dash leather back down with?It will have to be done properly at some stage so I need something that will stick but also something that will come unstuck aswell at a later date without ttting up the leather.
Thanks in advance

Scorcher

scorcher

Original Poster:

4,122 posts

263 months

Tuesday 10th May 2005
quotequote all
Someone!? Anyone!? No-one!!! Bugger!Start with Pritt stick and work me way through 'em all then.

Sam Gamgee

966 posts

282 months

Tuesday 10th May 2005
quotequote all
Absolutely no idea! Just took pity and thought someone had better reply before you blow a gasket!!
Seriously, you could try copydex or similar if you plan to get a pro job done at some stage. what part of dash is loose? Mine is away in the well in front of passenger side but is hardly noticeable. However do want this sorting but there are more pressing things to sort. Good luck, BTW. Aint got courage meself to av a go at me dasheeo! Cheerio.

Dave

wedge girl

4,688 posts

268 months

Tuesday 10th May 2005
quotequote all
Evo stick, works well.

Sam Gamgee

966 posts

282 months

Tuesday 10th May 2005
quotequote all
wedge girl said:
Evo stick, works well.



Or evostik...just kidding wedgie type lady!

So you`d better slap me....

>> Edited by Sam Gamgee on Tuesday 10th May 21:20

kingr seven

233 posts

268 months

Tuesday 10th May 2005
quotequote all
Personally, I'd use contact adhesive but make sure you do a good job first time! It will come apart, but not as easily as prit stick (Ahem!), can't imagine it'll make any more mess than copydex or similar.

Kingr

pebbledash

795 posts

295 months

Wednesday 11th May 2005
quotequote all
Sorry only just spotted this.

Matt I have restuck my dash.

Where is it lifting?

give me a call or drop over as you are close.

don't mind giving you a hand etc.

Look at balistic bannanas web site, i sent him info on what i did

The glue to use in an industrial Evo Stick, but you only get one go, unless you want a large cleaning job. dont touch it with anything else, as this will contaminate the surfaces and require more cleaning.

Regards
mark

>> Edited by pebbledash on Wednesday 11th May 16:55

scorcher

Original Poster:

4,122 posts

263 months

Friday 13th May 2005
quotequote all
Thanks Mark....Will have a word or three with you at next tvrcc meeting.

tvr_nut

390 posts

303 months

Friday 13th May 2005
quotequote all
wedge girl said:
Evo stick, works well.


Also good for sticking back bits of detached carpet, rubber seals that have come off the hood, not to mention the nipper's broken toys.....

Wonderful stuff (no I do not work for the manufacturers, nor been sniffing it..............)

Have a good w/e - if any of you are going to Barbon hillclimb Sat will see ya there!