Clock - Nav screen offset
Clock - Nav screen offset
Author
Discussion

LiamV12V

Original Poster:

89 posts

119 months

Thursday 27th September 2018
quotequote all
I’ve got a 5 minute offset between what I set on the nav screen and what’s displayed on the analogue clock. According to the manual the clock should follow whatever is set in the nav. Any ideas, or is it a case of “they all do that, sir...”?

Cheers, Liam

rovcallum

553 posts

174 months

Thursday 27th September 2018
quotequote all
I would be concerned....


a98pmalcolm

213 posts

108 months

Thursday 27th September 2018
quotequote all
Go into sat nav settings to double check

shuzzy

294 posts

245 months

Friday 28th September 2018
quotequote all
If you have the updated dash with the non adjustable analogue clock, then you have few options. It drove me mad for months having differing times on the clocks. I tried everything, but the only thing that resolved it in the end, was a visit to the dealer. It was in for a recall a few months ago and I asked if they could synchronise the clock, which they duly did.

I am also led to believe a battery disconnect resolves it, but not something I wanted to do, due to having to relearn/reset many parameters.

bignoise

314 posts

132 months

Friday 28th September 2018
quotequote all
Battery disconnection resolved mine ……. well for a couple of weeks as its now back to 5 mins difference