Just cleaned car. Something in the water? Help...
Discussion
please.
I cleaned and waxed the car to a beautiful shine 3 weeks ago.
I took it out, and a few birds, the flying ones, splatted the paint work. So I rinsed the car with the hose when I got home, and left it to dry naturally (no Chamoix available at the time).
Went in the garage during the week and noticed that the water beads had dried and left lots (loads) of circular dry marks all over the car. Just figured when I clean it again, they would go.
Well, I have just given the car a real good clean, using Turtle Wax Wash n Wax (a little less than it recommends on the instructions) went over the car 3 times with some warm water, rinsed throughout, and dried with a chamoix.
The problem is, the dried water residue is still all over the car. Whilst you have to take a close look to see it, its very noticeable, and cant understand why this would be the case.
The car looks very clean, and shiney, but any ideas on the marks its left, and how I can get rid of?
I rinse my Frontera all the time, as gets loads of bird crap on the drive, and its never left with this type of residue on it?
I cleaned and waxed the car to a beautiful shine 3 weeks ago.
I took it out, and a few birds, the flying ones, splatted the paint work. So I rinsed the car with the hose when I got home, and left it to dry naturally (no Chamoix available at the time).
Went in the garage during the week and noticed that the water beads had dried and left lots (loads) of circular dry marks all over the car. Just figured when I clean it again, they would go.
Well, I have just given the car a real good clean, using Turtle Wax Wash n Wax (a little less than it recommends on the instructions) went over the car 3 times with some warm water, rinsed throughout, and dried with a chamoix.
The problem is, the dried water residue is still all over the car. Whilst you have to take a close look to see it, its very noticeable, and cant understand why this would be the case.
The car looks very clean, and shiney, but any ideas on the marks its left, and how I can get rid of?
I rinse my Frontera all the time, as gets loads of bird crap on the drive, and its never left with this type of residue on it?
Im in a hard water area as well .. when I first saw the marks I thaught something had eaten thru the laquer ... I had to Tcut the panels then wax them to get rid ... have waxed a few times since and chammyd ... tried the new Flash washer ... seems Ok ... did it late at night so it couldnt evaporate off properly ... rained most of weekend so didnt bother trying again ...will do in the week though!
hope this helps ... DAS
(ps mines black probably worst colour for this!)
hope this helps ... DAS
(ps mines black probably worst colour for this!)
I have the same problem when I moved to my new house. The hard water leaves marks if you dont dry the car. Have a dark blue scooby and they are quite noticeable. As said earlier in this thread, Polish gets most of the marks off. Some of the marks that had been on the car for a while needed T-cut, but now looks like new...well appart from stone chips!
gazzab said:
I bought an de-inoniser thing yesterday to avoid the marks on drying paintwork. It is only the flash one but I think it might help once old marks are gone. The old marks wont come back one cut/polished out, but new ones will arrive if you allow hard water to dry on the car.
I've got one of these and I have a black car, it is brilliant. Really does leave no marks and a very healthy shine. I tend to take most of the water off with a blade, but I don't have to worry about every single drop anymore.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




