Protecting electronics outside
Author
Discussion

wjwren

Original Poster:

4,484 posts

166 months

Sunday 7th October 2018
quotequote all
Ive got a gazebo slash bar which is waterproof but is open on 2 sides, I have a sub in there and pair jbl outdoor speakers. The sub isnt waterproof but it wont get wet. Would the damp damage it and if so how best to protect it. I was thinking of encasing it in another box made from tongue and groove and lining this with celotex or similar. Not air tight as it might sweat. Any pointers please. It wont really get used in the winter so I guess I could just unplug it and bring it in. Ive seen outdoor subs, how do these differ and how do manufacturers protect the electronics in something like this?

Glade

4,518 posts

254 months

Sunday 7th October 2018
quotequote all
I don't know about speakers but used to make power supplies for LED lights.

Typically you either ensure that the case provides protection. Failing that you can coat the PCB in "conformal coating" to prevent moisture from humidity that has condensed on the electronics from getting wet. Basically preventing corrosion/shorts on the critical bits.

Last resort (but ultimate) was encapsulating within "potting compound" which probably wouldn't be relevant, but basically turns the kit into a solid silicone block, so water can't reach the components.

Maybe try protecting the delicate bits with conformal coating.

twister

1,595 posts

267 months

Sunday 7th October 2018
quotequote all
Glade's covered the electronics side of things, and you'll also need to consider what materials the sub casing, speaker cone etc are made of and how susceptible they could be to moisture damage. You might have it protected against being rained on, but what about condensation or even just humidity?

There's also the issue of temperature variations to consider - consumer grade kit designed for indoor use only won't have been tested for use or storage much below freezing or above 40C. Even some of the industrial spec stuff we make is only rated for operation at up to 50C, and if you've got something inside a box (e.g. the electronics within the sub enclosure) exposed to direct sunlight, then the internal temps can quite rapidly rise to the point where stuff stops working.

And lastly, don't ignore the problems caused by garden wildlife, particularly the smaller stuff such as ants, spiders, slugs, snails etc that will be only too happy to set up home inside whatever nice cosy box you put outside for them...