Use spare BT hub as a imac print server
Use spare BT hub as a imac print server
Author
Discussion

andygo

Original Poster:

7,422 posts

286 months

Wednesday 10th October 2018
quotequote all
I have a spare BT home hub 5.

Is it possible to attach it via its USB connection to the router (I can do that bit!) and get my mac to see it as a wifi print server.

I have tried to set it up via preferences, but the setup says can't see the printer or the wifi from the router. I have put in the IP address that I have, but even that seems to have disapeared now.

My Mac is connected via ethernet cable to my main router.

I wanted to enable this separate wifi connection to my laser printer so I could park it in a more convenient place in the room than clogging up my desk.

I suppose I could buy a dedicated print server thingy, but, for windows at least, a dedicate hub seems like a viable solution.

Any ideas Mac'ers

clockworks

7,818 posts

176 months

Wednesday 10th October 2018
quotequote all
Just get a wireless printer?

andygo

Original Poster:

7,422 posts

286 months

Wednesday 10th October 2018
quotequote all
I have a mono Samsung laser printer with the firmware modified. It prints for zillions if pages and when the toner runs out it’s a couple of quid to refill.

No point in swapping to a new one imho

mmm-five

12,402 posts

315 months

Wednesday 10th October 2018
quotequote all
Why not jut route an ethernet cable from the router to the printer?

andygo

Original Poster:

7,422 posts

286 months

Wednesday 10th October 2018
quotequote all
Main router is in my lounge, nowhere near the printer so don't want to do a long ethernet run.

What would work best is for me to park the printer in another part of my office, usb cable from printer to router. Mac prints via that router to printer. If what is basically a software solution is possible, than that is the cheapest way forward other than buying a print server thingy for about £40. A print server is only a router anyway i think.

Bikerjon

2,211 posts

192 months

Wednesday 10th October 2018
quotequote all
Not sure, it might work with iMac connected to main network by ethernet and then via Wi-Fi to spare home hub with printer attached - is that what you mean?

Alternatively get a used Airport express from ebay and run it in client mode.


andygo

Original Poster:

7,422 posts

286 months

Wednesday 10th October 2018
quotequote all
Bikerjon said:
Not sure, it might work with iMac connected to main network by ethernet and then via Wi-Fi to spare home hub with printer attached - is that what you mean?

Alternatively get a used Airport express from ebay and run it in client mode.
Yes, pretty much. Easier said than done, obviously, lol