Unofficial SolidWorks tuition / courses
Discussion
Just wondering if there are any SolidWorks users on here that can offer one-to-one tuition on the use of SolidWorks.
The official courses are hellish expensive so I just wondered if there were any other routes to go down.
I've found the YouTube videos pretty good except that the quality can be somewhat 'variable' though is certainly better than nothing.
Have subscribed to the www.lynda.com which provides some superb tutorial videos which costs approx £22 per month and really is money well spent.
Unfortunately I have a few instances on the use of the software which isn't covered by any of the videos I have watched so far, and could really do with a few hours hands-on tuition with an experienced user especially in the use of sheet-metal and multi-body parts.
The official courses are hellish expensive so I just wondered if there were any other routes to go down.
I've found the YouTube videos pretty good except that the quality can be somewhat 'variable' though is certainly better than nothing.
Have subscribed to the www.lynda.com which provides some superb tutorial videos which costs approx £22 per month and really is money well spent.
Unfortunately I have a few instances on the use of the software which isn't covered by any of the videos I have watched so far, and could really do with a few hours hands-on tuition with an experienced user especially in the use of sheet-metal and multi-body parts.
Yes they are expensive, I was fortunate that work paid for my courses, have not done the sheet metal module though and not that proffeciant in it to teach but have you looked at the tutorials in solid works as you do some of these on the courses and I am sure there is a sheet metal one.
Thanks guys for your comments, will take a look at your suggestions.
There just seems to be a massive gulf in support offered between users that are paying the steep annual fees and those that don't!
Aside from the hefty fees involved, many users can't or won't upgrade their PC to run the latest version of Windows that might be required to run the latest version of SolidWorks, unfortunately the upgrade fee and support fee have now been lumped into one by the almighty SolidWorks management team who seem to have detached themselves with reality, with the added sting in the tail that if users don't pay the annual fee and try to leap on board a few years later, they will have to pay the interim year-on-year fees - good luck with that business model. Yet new users can happily leap on board at the same rate - I see a flaw in the plan!
Here's an idea...
Perhaps some skilled ex-SolidWorks engineers might consider getting together to provide tuition to the many tens of thousands of SolidWorks users that are currently locked out of official support. Perhaps via phone or screen-share. I certainly don't mind paying a reasonable annual fee for this, but I'm certainly not paying out £1,700 per year which they currently demand from me.
Slightly off-topic, SolidWorks was founded in1993 by MIT graduate Jon Hirschtick, who along with another former SolidWorks CEO John McEleney, are now co-founders of Onshape.
There just seems to be a massive gulf in support offered between users that are paying the steep annual fees and those that don't!
Aside from the hefty fees involved, many users can't or won't upgrade their PC to run the latest version of Windows that might be required to run the latest version of SolidWorks, unfortunately the upgrade fee and support fee have now been lumped into one by the almighty SolidWorks management team who seem to have detached themselves with reality, with the added sting in the tail that if users don't pay the annual fee and try to leap on board a few years later, they will have to pay the interim year-on-year fees - good luck with that business model. Yet new users can happily leap on board at the same rate - I see a flaw in the plan!
Here's an idea...
Perhaps some skilled ex-SolidWorks engineers might consider getting together to provide tuition to the many tens of thousands of SolidWorks users that are currently locked out of official support. Perhaps via phone or screen-share. I certainly don't mind paying a reasonable annual fee for this, but I'm certainly not paying out £1,700 per year which they currently demand from me.
Slightly off-topic, SolidWorks was founded in1993 by MIT graduate Jon Hirschtick, who along with another former SolidWorks CEO John McEleney, are now co-founders of Onshape.
Dave. said:
Any grants available?
That's an idea which I hadn't considered but it's ignoring the fundamental problem.Ridealong said:
Are you on LinkedIn?
There is 2 Essential (Beginners & Intermediate) and Surfacing (Intermediate) training courses - "Enjoy this free course - unlocked just for you, for 24 hours. Get full access to the entire library with a 1-month free trial today."
These video tutorials are superb, though I ought to mention that LinkedIn bought out the lynda.com brand last year, so the tutorial videos are the same. I'm currently subscribed to them which costs approx £22 per month and is well worth the money because the videos are very in-depth and cover nearly every aspect, yet easy to follow. They bring out updates each year as the underlying packages update and keep the older versions for viewing by users using the older variants which is very handy indeed.There is 2 Essential (Beginners & Intermediate) and Surfacing (Intermediate) training courses - "Enjoy this free course - unlocked just for you, for 24 hours. Get full access to the entire library with a 1-month free trial today."
To anyone reading this, they provide hundreds if not thousands of tutorial videos on most software packages so not just limited to SolidWorks. Has to be one of the best online video tutorial resources around. Now if they offered a bespoke 'hands on screen share' option with a tutor for a small fee I think they would have the market sewn up.
What SolidWorks are doing is bizarre, they are alienating their customer base and turning away wads of money. Am just hoping that one day Apple will unveil their own version of an easy to use and intuitive 3D CAD software package, and shake up the entire market like they did to video editing, which until iMovie and Final Cut Pro came out was the preserve for the old school.
I have actually spoken to the reseller about support on a number of occasions but think their hands are tied by SolidWorks, it's either all or nothing, and having contacted SolidWorks support team and received back a very lacklustre and unenthusiastic response I doubt this stance is going to change. I get the feeling that they are not really bothered!
fiatpower said:
Have you looked at Fusion360? You can use for free if you are a small business dependant on turnover.
Good point, I looked at Fusion360 when I was initially considering which CAD package to buy and decided against it for a variety of reasons, I think the main one being that it was cloud based and it didn't offer multi-body part and assembly capabilities, though I might be wrong in that respect.SolidWorks is extremely good for my purpose even though it can be very clunky at times to use, and I've pretty much figured it out for my own needs, it's just the fact that I can't seem to overcome a few hurdles and can't get the people in the know to help me out with it which is frustrating to say the very least. Is commonly known as goodwill and there doesn't seem to be any!
If SolidWorks had only cost a few £100 then fair comment, but when you spend nearly £5,000 you do expect a bit more in the way of support!
Which of course leads me back to ask whether there is anything around to fill this support void because at the moment there seems to be a distinct lack of hands-on tutorial courses being offered anywhere in the UK which strikes me as somewhat odd.
egomeister said:
Hey thank you egomeister for the link, that looks very interesting indeed, you must have posted it whilst I was typing out my earlier reply!Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff



