Part built desktop
Author
Discussion

Derek Smith

Original Poster:

50,032 posts

279 months

Monday 29th October 2018
quotequote all
For reasons I won’t bore you with, I’m after a company that will part-build a desktop for me.

All I want is a tower case, m/b, processor and memory.

Those that I’ve tried online refuse to leave out items such as CPU and hard drives/SSD, which I already have. Any suggestions gratefully received.


Monty Python

4,813 posts

228 months

Monday 29th October 2018
quotequote all
Is there any particular reason you need a company to build it for you?

If it has to be a company, have you tried CCL?

Edited by Monty Python on Monday 29th October 10:11

Captain Benzo

442 posts

169 months

Monday 29th October 2018
quotequote all
is it a barebones bundle you need?

https://www.novatech.co.uk/barebonebundles/view/bb...

http://www.overclock.co.uk/product/Fractal-Design-...


this sort of thing. I've used novatech years ago with no issues.

Derek Smith

Original Poster:

50,032 posts

279 months

Monday 29th October 2018
quotequote all
Thanks for the replies. The reason I'm not building it myself is domestic. I blew an I/c last time and it cost. I've been told that'we can afford it' , it being having it built rather than blowing another integrated circuit. Thanks for the help.

Jim the Sunderer

3,261 posts

213 months

Monday 29th October 2018
quotequote all
Derek Smith said:
For reasons I won’t bore you with, I’m after a company that will part-build a desktop for me.

All I want is a tower case, m/b, processor and memory.

Those that I’ve tried online refuse to leave out items such as CPU and hard drives/SSD, which I already have. Any suggestions gratefully received.
Eh? The CPU is the processor.

Monty Python

4,813 posts

228 months

Monday 29th October 2018
quotequote all
Derek Smith said:
Thanks for the replies. The reason I'm not building it myself is domestic. I blew an I/c last time and it cost. I've been told that'we can afford it' , it being having it built rather than blowing another integrated circuit. Thanks for the help.
PC Specialist looks like it should do what you want.

InitialDave

15,191 posts

150 months

Monday 29th October 2018
quotequote all
Are the components you have already new (or fairly new)?

You may see better value from selling them and buying an complete unit?

Derek Smith

Original Poster:

50,032 posts

279 months

Monday 29th October 2018
quotequote all
Monty Python said:
PC Specialist looks like it should do what you want.
They refuse to exclude the SSD and psu. I've got them as my fall back but I don't need another SSD and I've got a year old 650w psu. I'm on a budget.

Paddymcc

1,312 posts

222 months

Monday 29th October 2018
quotequote all
They probably dont want to do it because they are building the units up, testing them and then you expect them to pull half the components out again and make less money.

kingBadger

196 posts

194 months

Monday 29th October 2018
quotequote all
Freshtech Ltd have built part-complete PC's for me before and I've been very pleased with them

RizzoTheRat

29,153 posts

223 months

Monday 29th October 2018
quotequote all
Not quite what you're after, but a lot of places sell motherboard/processor/memory bundles that will come ready assembled and tested. Putting that in a case involves about 6 screws and will be no more risky than fitting your own power supply and drive to the system.

sgrimshaw

7,587 posts

281 months

Monday 29th October 2018
quotequote all
Googlw "computer shops" in your locale .... then call, or even better go and see, a couple ... explain exactly what you want.


The_Jackal

4,854 posts

228 months

Monday 29th October 2018
quotequote all
You want a company to basically screw a motherboard into a case and insert memory because you don't want to blow anything up.
Yet you are going to connect up the PSU and all the important wires yourself???

You will have no come back if anything blows up, as you have done the electrical stuff yourself.

Penelope Stopit

11,209 posts

140 months

Monday 29th October 2018
quotequote all
The_Jackal said:
You want a company to basically screw a motherboard into a case and insert memory because you don't want to blow anything up.
Yet you are going to connect up the PSU and all the important wires yourself???

You will have no come back if anything blows up, as you have done the electrical stuff yourself.
I build my own Desktops but would never undertake fitting a CPU/Processor to a Motherboard, it's all very easy for the experienced PC builders to question why, what many people don't understand is that there are no second chances when fitting a CPU or later a Motherboard into a case and perhaps getting a standoff wrong in some way
People that work on PC's and fit CPU's to Motherboards may get some practice in on old boards, I like many others don't fancy practicing with a new expensive CPU and board

Derek, have you considered buying a CPU/Motherboard combination and then taking it with a case to a specialist to have it fitted?


Edited by Penelope Stopit on Monday 29th October 16:51

deckster

9,631 posts

286 months

Monday 29th October 2018
quotequote all
Penelope Stopit said:
I build my own Desktops but would never undertake fitting a CPU/Processor to a Motherboard, it's all very easy for the experienced PC builders to question why, what many people don't understand is that there are no second chances when fitting a CPU or later a Motherboard into a case and perhaps getting a standoff wrong in some way
Out of interest have you tried? You're right that you only get the one chance, but with modern CPU socketing it's practically impossible to get it wrong.

Funk

27,818 posts

240 months

Monday 29th October 2018
quotequote all
Derek; the reason you're running into issues is that it'd be a pain for a company to part-build and then have you (as a customer) have an issue with it not booting - you can imagine the potential grief from end-users blaming the company's 'shoddy install'... It's much easier for a company to have end-to-end ownership of the build where they can know they sent it out working, especially when they'll want to ensure things like the PSU being sufficient for the workload etc. It's also probably utterly unprofitable for them so you and imagine why they just simply don't want the hassle.

Why not buy a 'barebones' motherboard, CPU and RAM and then install that in your choice of case? There's not much to get wrong and you'd be fitting everything else of yours anyway?

deckster said:
Penelope Stopit said:
I build my own Desktops but would never undertake fitting a CPU/Processor to a Motherboard, it's all very easy for the experienced PC builders to question why, what many people don't understand is that there are no second chances when fitting a CPU or later a Motherboard into a case and perhaps getting a standoff wrong in some way
Out of interest have you tried? You're right that you only get the one chance, but with modern CPU socketing it's practically impossible to get it wrong.
In the politest possible way, I wouldn't go there mate - Penelope has some....erm..... interesting ideas regarding what to do with PCs...

Edited by Funk on Monday 29th October 17:09

Penelope Stopit

11,209 posts

140 months

Monday 29th October 2018
quotequote all
deckster said:
Penelope Stopit said:
I build my own Desktops but would never undertake fitting a CPU/Processor to a Motherboard, it's all very easy for the experienced PC builders to question why, what many people don't understand is that there are no second chances when fitting a CPU or later a Motherboard into a case and perhaps getting a standoff wrong in some way
Out of interest have you tried? You're right that you only get the one chance, but with modern CPU socketing it's practically impossible to get it wrong.
Thank you for this, I will undertake any electrical and most mechanical jobs but stop at CPU's. Is the job really that easy? What about bending pins?

sgrimshaw

7,587 posts

281 months

Monday 29th October 2018
quotequote all
Penelope Stopit said:
Thank you for this, I will undertake any electrical and most mechanical jobs but stop at CPU's. Is the job really that easy? What about bending pins?
Yes it is really easy.

You should be using zero force when installing the CPU, when orientated correctly it will simply sit into place.

https://www.rockpapershotgun.com/2018/06/27/how-to...

Penelope Stopit

11,209 posts

140 months

Monday 29th October 2018
quotequote all
sgrimshaw said:
Penelope Stopit said:
Thank you for this, I will undertake any electrical and most mechanical jobs but stop at CPU's. Is the job really that easy? What about bending pins?
Yes it is really easy.

You should be using zero force when installing the CPU, when orientated correctly it will simply sit into place.

https://www.rockpapershotgun.com/2018/06/27/how-to...
Thanks for this. I'm going to remove and fit a CPU in the near future


Edited by Penelope Stopit on Monday 29th October 18:01

Penelope Stopit

11,209 posts

140 months

Monday 29th October 2018
quotequote all
Funk said:
In the politest possible way, I wouldn't go there mate - Penelope has some....erm..... interesting ideas regarding what to do with PCs...

Edited by Funk on Monday 29th October 17:09
How strange