Anybody know their way around ThinkPads? T430 playing up!
Anybody know their way around ThinkPads? T430 playing up!
Author
Discussion

Jonny_

Original Poster:

4,730 posts

238 months

Sunday 4th November 2018
quotequote all
Having an odd problem with the "ebay bargain" Lenovo T430 that I bought about a year ago. Wonder if anyone here has had the same issue and knows the cause?

Yesterday it was working fine; today, it flat out refused to switch on. No matter how many times i pushed the button, unplugged/reinserted the charger, removed battery/CMOS battery/RAM module, I could not get the damn machine to do anything at all.

Then, seemingly at random, it powered up! Coincident (or maybe not) with plugging the charger back in for the 18 millionth time. And booted into Windows, and to all intents and purposes worked 100% correctly. Battery reported as fully charged, and the machine continued to run when the charger was unplugged, and reported charging when plugged back in. So I have my suspicions that its not something as simple as a power supply or battery fault.

Unfortunately, after shutting down the laptop, it again refuses to switch on.

Anyone got any ideas as to a possible cause? I'm stumped. Charger is fine, battery is fine, CMOS battery measures about 3.02V.

The machine doesn't owe me much, having cost a mere £150 over 12 months ago, so it's not the end of the world if I have to replace it with another and extract the contents of its hard drive via USB caddy. But if there's an easy fix (or a greasy bodge) that'll resurrect it, I'll be happy!

Cheers.

Slushbox

1,484 posts

136 months

Sunday 4th November 2018
quotequote all
Could be a corrupt BIOS. There's a 'reset to Factory Defaults' someplace.

The other nerdy trick is to swap over the RAM sticks in the sockets as they occasionally garner filth and debris unto themselves.

After that, the keyboard socket under the keyboard might be intermittant, the keyboard lifts off the top once the screws on the bottom are removed. YouTube has videos.

Paddymcc

1,312 posts

222 months

Sunday 4th November 2018
quotequote all
I'd try a new keyboard first as that contains the power switch and they sometimes go faulty. Easy enough to change as well.

TonyRPH

13,552 posts

199 months

Sunday 4th November 2018
quotequote all
According to the person who posted this Youtube video it was a faulty stick of RAM in their case.

I also found some comments on a Lenovo forum which suggested the same thing.

Try reseating the RAM.

You could also try cleaning the contacts - a pencil eraser will do the trick there - just run it over the gold contacts on the RAM a few times.




Sheepshanks

41,379 posts

150 months

Sunday 4th November 2018
quotequote all
Several posts in the Lenovo forum say press the power button 10 times quickly then hold for 10 seconds.

Jimmy Recard

17,551 posts

210 months

Sunday 4th November 2018
quotequote all
If you want to try the keyboard, I have one that you can have. A few of the keys don't work but the power key does. It should tell you if you need to buy a new one, anyway.

It's from my T530 and I'm pretty sure it's the same part. I was going to take it to the tip with a load of other stuff this week

Jonny_

Original Poster:

4,730 posts

238 months

Sunday 4th November 2018
quotequote all
Thanks chaps. Will try all the above tomorrow and see if the T430 can be revived.

Fortunately we've still got some T430s in use at work, so I can get my hands on a known good battery and power supply tomorrow.

I'm also going to try powering my duff machine up using a docking station, which has its own power button - if that works then it'll point to a naff keyboard/power switch.

Fingers crossed - and worst case is an excuse for an upgrade... smile

Jonny_

Original Poster:

4,730 posts

238 months

Monday 5th November 2018
quotequote all
Tried the T430 on a docking station and another power supply just now. As soon as it clicked into place, without touching a button, the machine powered up and booted. Hooray!

... But after shutting down, it wouldn't power up again, either using its own power button or the one on the dock. Bugger. Square 1 again.

I wondered if there could be a dry joint somewhere in the internal power supply circuitry. So I popped the battery out and gave the brass battery contacts a gentle "wiggle", then reinserted the battery and tried again.

This time, success of the consistent kind. Machine now fires up, shuts down and fires back up repeatedly and consistently. So I suspect the enduring solution will be to open it up, find where those brass contacts land on a PCB, and resolder the joints. Hopefully that'll do the trick (although I still quite fancy a T470...).

Thanks for all the suggestions gents, much appreciated!