Discussion
hughandjen said:
Hi guys
I’ve bought an old Z3 and was removing the dash today and found this slotted in behind the glove compartment. Not accessible without removing a lot of stuff. It wasn’t connected to anything.
Any computer geeks out there to tell me what it is
Thanks
ZX Spectrum or similar, I think. Possibly even a ZX81I’ve bought an old Z3 and was removing the dash today and found this slotted in behind the glove compartment. Not accessible without removing a lot of stuff. It wasn’t connected to anything.
Any computer geeks out there to tell me what it is
Thanks
I don't think it's that, no expert but what I'm seeing on Google looks nothing like those at all.
It could be literally anything, unless someone here happens to recognise the layout or is an electronic engineer and might make a guess of what it does from the components.
It could be literally anything, unless someone here happens to recognise the layout or is an electronic engineer and might make a guess of what it does from the components.
Edited by mizx on Saturday 10th November 21:25
The board has a 4MHz Z80 cpu and a lot of I/O logic. The chip with the hand written label is probably an EPROM (remove the label and expose the chip to ultraviolet light to erase it before reprogramming it) containing the program it ran. It may be a data logger or it could be an add in card for a larger computer to handle data input and output. The Z80 PIO is a parallel interface chip, the Z80 DART is a serial interface chip. Quite a few of the surrounding chips suggest a number of data inputs and/or outputs.
It would be useful to get the whole board in view, particularly to see any connectors, either edge connectors or pin headers that might reveal what it was meant to connect to. A shot of the other side would also be helpful.
It would be useful to get the whole board in view, particularly to see any connectors, either edge connectors or pin headers that might reveal what it was meant to connect to. A shot of the other side would also be helpful.
66mpg said:
The board has a 4MHz Z80 cpu and a lot of I/O logic. The chip with the hand written label is probably an EPROM (remove the label and expose the chip to ultraviolet light to erase it before reprogramming it) containing the program it ran. It may be a data logger or it could be an add in card for a larger computer to handle data input and output. The Z80 PIO is a parallel interface chip, the Z80 DART is a serial interface chip. Quite a few of the surrounding chips suggest a number of data inputs and/or outputs.
It would be useful to get the whole board in view, particularly to see any connectors, either edge connectors or pin headers that might reveal what it was meant to connect to. A shot of the other side would also be helpful.
It would be useful to get the whole board in view, particularly to see any connectors, either edge connectors or pin headers that might reveal what it was meant to connect to. A shot of the other side would also be helpful.
dfen5 said:
Hard to say as I can’t see the edges of the board to see how it interfaces but I reckon that’s a control board off something - machine, early robotic assembly machine, fancy printer, something along those lines.
From the latest photo that looks spot on. I used to build factory automation stuff with similar edge connectors back in the day.. 6800 rather than z80 though!Edited by dfen5 on Sunday 11th November 07:23
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff



