Access point question
Discussion
I have helped a neighbour set up an access point hard-wired with ethernet from his router.... about 25 meters from the house. His router is giving him 17Mbps, the AP about 3Mbps.
I've tried various configurations, but can't get the AP's speed anywhere near the router.
Could it be that he has bought crap cable? Would that be the first port of call? I did see that the ethernet cable he bought is flat cable, a bit odd looking. The AP is a TP Link TL-WA801ND. Fairly standard thing.
Or could it be something else?
Thanks in advance.
I've tried various configurations, but can't get the AP's speed anywhere near the router.
Could it be that he has bought crap cable? Would that be the first port of call? I did see that the ethernet cable he bought is flat cable, a bit odd looking. The AP is a TP Link TL-WA801ND. Fairly standard thing.
Or could it be something else?
Thanks in advance.

VEX said:
Have you checked what channel the AP is running on and if it is clashing with anything else?
Also you could plug you laptop into the network cable feeding the AP and see what speed you get compaired to connecting directly to the router.
V.
I've tried auto, 1, 6 and 11 on the AP channels.Also you could plug you laptop into the network cable feeding the AP and see what speed you get compaired to connecting directly to the router.
V.
Unfortunately we are both Mac users and can't connect our laptops directly as we don't have the adapters.
Typical!Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


