Help - Identify Micro USB socket component.
Discussion
Hi,
My JBL Charge speaker, Micro USB charge socket has given up the ghost and won't charge. I have established a broken connection between the Micro USB and PCB.
Looking at the internet I can get a Micro USB breakout board, which has the Micro USB soldered to the PCB meaning it's just a matter of soldering the 3 connecting wires. However, on the board I have removed there are two components which appear to be in series with the Ground & Vcc. Pins 1 & 5. See photo, below components RS1 and RS2 with 0 printed on them.
Any ideas what they are?
Pedro.

My JBL Charge speaker, Micro USB charge socket has given up the ghost and won't charge. I have established a broken connection between the Micro USB and PCB.
Looking at the internet I can get a Micro USB breakout board, which has the Micro USB soldered to the PCB meaning it's just a matter of soldering the 3 connecting wires. However, on the board I have removed there are two components which appear to be in series with the Ground & Vcc. Pins 1 & 5. See photo, below components RS1 and RS2 with 0 printed on them.
Any ideas what they are?
Pedro.
LOL - thanks for responses. They say there's no such thing as a daft question but at the moment I'm feeling a but dim. What happened to the good old linking wire.

Pedro
RogerDodger said:
Any pics of your project would be grand when you are doing it. My Micro USB on my JBL charge is on its way out - only charges with once specific lead now, when you wiggle it.
Will do, give me a few days to get sorted. I'm looking at replacing with something like this. Just need to ensure the PCB can be cut down to size to fit in the case slots.Pedro
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


