Vantage V8 GSID
Author
Discussion

rallymaster123

Original Poster:

35 posts

95 months

Friday 11th January 2019
quotequote all
Hi all, just taken my manual N430 out again and noticed that the Gear Shift Indicator Display isn't showing the rev bars as per the owners manual says it should. Does anyone know if this is a custom setting (It does show 'R' when the car is put into reverse!)

cheers


Minglar

1,952 posts

154 months

Friday 11th January 2019
quotequote all
Hi rallymaster123

If I remember correctly, the bars only light up when you are at the very top end of the rev band. I don’t think it’s a customisable set up. The only way to see if it works is to drive it hard and rev the nuts out of it......just make sure you have a clear road ahead! The “R” always shows when reverse gear is engaged. Hope that helps.

Best Regards

Minglar

Composer62

2,402 posts

117 months

Friday 11th January 2019
quotequote all
It only shows the bars close to the point where you need to shift up.

I've only seen them a few times and I was also pretty busy keeping my eyes on the road, enjoying the noise and giggling at my partner being pinned back in the passenger seat .... so there's a lot to take in when they light up very briefly smile

rallymaster123

Original Poster:

35 posts

95 months

Friday 11th January 2019
quotequote all
Great thanks both. Will give it a go smile

mhurley

823 posts

164 months

Friday 11th January 2019
quotequote all
I never knew this, will have to keep an eye on the display next time!

V8V Pete

2,536 posts

157 months

Saturday 12th January 2019
quotequote all
I see mine quite regularly whistle

Actually find them quite useful as they are more in your line of sight than the rev counter and it's always nice to just avoid the rev limiter and be rewarded with a crackle from the exhaust as you execute a perfect upshift biggrin

Edited by V8V Pete on Saturday 12th January 18:53