Anybody good with graphic design?

[wjwren]

Not sure what program you would use, maybe Photoshop or illustrator, Word! Any wizzes able to recreate this for me for man cave bar in bright red? I am going to get a sign made, but company need a high quality graphic of it. Thanks!

[StevieBee]

wjwren]Word! said:

Wash your mouth out! Never should 'Word' be used in the same sentence as 'Graphic Design' !

What they need is a vector graphic. Bump this into the Business section and you may get a better response there.

[louiebaby]

Have you tried something like:

https://www.autotracer.org/

[wjwren]

^ i think the problem I have is that image quality is not good enough to use on a 1m by 700mm acrylic sign. What would be the best program to use?

[louiebaby]

wjwren said:

^ i think the problem I have is that image quality is not good enough to use on a 1m by 700mm acrylic sign. What would be the best program to use?

By "vectorising" the image, it is fully scalable:

https://searchwindevelopment.techtarget.com/defini...

[langtounlad]

Google 'Vector Magic' and use the online version to turn your image into a vector file which can then be scaled to the desired size.

[Kewy]

Yeh you're looking for a vector graphic mate, unless you have the original artwork or typeface it was created in then it will require tracing off which could take an hour or so.

If you have no other luck then drop me a PM

Edited by Scrump on Friday 18th January 19:22

[wjwren]

Kewy are you able to change the colour to red if i go ahead please? thanks

[Kewy]

wjwren said:

Kewy are you able to change the colour to red if i go ahead please? thanks

Yes of course mate, can be any colour you like.

But depending on how they're making the sign (I'd imagine it would be plotted vinyl applied to the acrylic), then the colour of the artwork is neither here no there as they would just cut it using the red vinyl. I would supply to you in EPS, PDF and any JPEG or PNG files that need.

[wjwren]

il check with them on what they need to be 100% safe. Thanks.

[RC1807]

I guess it's meant to say "Lupe's" (?), but it looks more like "L__upe's" ?

[The Moose]

$5 on Fiverr will get you a vector graphic which is scalable to whatever you like.

[Dave.]

Done it on my phone, might need a bit of finessing, but should be good to send them as a first draft.

I'll PM you my PayPal address.

[wolfracesonic]

Dave. said:

Done it on my phone, might need a bit of finessing, but should be good to send them as a first draft.

I'll PM you my PayPal address.

Well done that man, though the phrase to use is usually 'it's not perfect but I'm happy enough with it'.

[BertyFish]

The image isnt great quality but if you have it larger image trace in Ai would do it,
at the quality you have it comes out as below,

PS i own a sign company if you need a hand

[Kewy]

BertyFish said:

The image isnt great quality but if you have it larger image trace in Ai would do it,
at the quality you have it comes out as below,

PS i own a sign company if you need a hand

Any automatic image trace is awful, even more so when that vector is going to be used to plot for a vinyl graphic, maybe a trace with a tidy up would suffice but you'll never beat a manual trace for curve accuracy and minimum nodes.

If you can get it done proper on Fiverr for £5 then snap it up. I wouldn't charge any less than an hours rate for this.

[Alapeno]

These any good to you? 5 min redraw job with the pen tool in illustrator.

Can send you the vector over if you want for the signmaker.

Cheers.

[BertyFish]

Little bit more on it and its close..

Edited by BertyFish on Friday 18th January 14:36

[wjwren]

thats great, have you the vector for these please?

[wolfracesonic]

wjwren said:

thats great, have you the vector for these please?

Do you have clearance for the vector over? Roger, Victor, out.