Car stereo

[trevor stern]

Can anyone recommend a Bluetooth stereo that would fit an Audi A4 2.0t 2005.
Without having to rewire.

[eybic]

None of them should need a "rewire" as such, they will need a wiring adaptor harness but this simply plugs one end into the existing wiring and the other into the stereo.

[kevinf]

trevor stern said:

Can anyone recommend a Bluetooth stereo that would fit an Audi A4 2.0t 2005.
Without having to rewire.

They'll all need a rewire to some extent . There's no ignition feed from the factory & an aftermarket one won't drive the rear speakers.
Unfortunately there is no complete solution . A connects 2 unit with your current unit is probably the easiest It similates the CD changer . if you don't have one from factory it will need to be switched on using diagnostics . Post a picture of your current unit

[Dr G]

If the only thing you want to add is bluetooth then a Connect 2 unit (I like the Dension kits) is ideal and simple to install.

If you want an aftermarket head unit there are fascia and wiring kits available off the shelf to do both single and double DIN installs. If you're converting to double DIN you'll need a few bits of dashboard and a new climate control panel.