Coolant Hose Routing

[BRGChimaera430]

Hi Guys,

I've had all the coolant hoses disconnected on my Pre-Serp 430, along with a lot of other things for quite a while! Whilst I had them off I've replaced them with new silicone hoses and stainless hard pipes. The silicone hoses clearly need a bit of trimming as are longer than the original hoses.

I thought I took enough pictures when I disassembled but probably thought I wouldn't have much trouble plumbing things up, however i'm really not sure now which way round and what route each of the sections take!


I think I can work out the top hose to the coolant tank, but I can't work out the route of the bottom rad hose through the Anti-roll bar and the various chassis tubes.

Does any one have any decent pics of the routing or can give me some pointers?

Thanks in advance!

[Classic Chim]

this might help

[BRGChimaera430]

Thanks,

But that looks like a later one.

Mine is a '94 pre-serp with no PAS so doesn't climb up over the chassis rail like that. Only seem to be able to find pics of later ones!

[Jon100p]

not the easiest of things to photo but these are of my '93 if they are any help.
Jon

[BRGChimaera430]

Hi Jon,

That's perfect, exactly what I needed!

Thanks so much for taking the time to sort them out for me.

Cheers.

[Classic Chim]

And it’s routed quite different on the pre serp. Good to see how both are set up

[Brithunter]

Sorry only just seen this or I would have take some photos for you on the hose routing on my 430.