HELP - clear rear lens needed... (Honey I shrank The Car!!!)
Discussion
I was removing the condensation from from my 07 Vantage rear (clear) light.
After carefully opening it all up, I popped the lens back in the oven at 100C to loosen and remove the adhesive before refitting the lens... while my back was turned, the oven temperature was also turned... UP!
The lens is irredeemably warped and shrunk - but the light cluster itself is all fine,
Can anyone help me urgently source a replacement lens, or failing that a RIGHT HAND (UK DRIVER'S SIDE) clear light, without having to buy the set of two? I'm Brighton based but can collect anywhere in the UK.
Many thanks fellow forumites!
After carefully opening it all up, I popped the lens back in the oven at 100C to loosen and remove the adhesive before refitting the lens... while my back was turned, the oven temperature was also turned... UP!
The lens is irredeemably warped and shrunk - but the light cluster itself is all fine,
Can anyone help me urgently source a replacement lens, or failing that a RIGHT HAND (UK DRIVER'S SIDE) clear light, without having to buy the set of two? I'm Brighton based but can collect anywhere in the UK.
Many thanks fellow forumites!
https://www.ebay.co.uk/itm/Aston-Martin-DB9-DBS-V8...
Buy this pair and sell the NS one to get some money back?
https://www.ebay.co.uk/itm/Aston-Martin-DB9-DBS-V8...
Buy this pair and sell the NS one to get some money back?
https://www.ebay.co.uk/itm/Aston-Martin-DB9-DBS-V8...
Actually this looks the best bet. Fauitly light but lens fine £250
https://www.ebay.co.uk/itm/Aston-Martin-DB9-DBS-Vi...
https://www.ebay.co.uk/itm/Aston-Martin-DB9-DBS-Vi...
NealCS said:
I was removing the condensation from from my 07 Vantage rear (clear) light.
After carefully opening it all up, I popped the lens back in the oven at 100C to loosen and remove the adhesive before refitting the lens... while my back was turned, the oven temperature was also turned... UP!
The lens is irredeemably warped and shrunk - but the light cluster itself is all fine,
Can anyone help me urgently source a replacement lens, or failing that a RIGHT HAND (UK DRIVER'S SIDE) clear light, without having to buy the set of two? I'm Brighton based but can collect anywhere in the UK.
Many thanks fellow forumites!
Sorry to hear that but know the feeling because I did the same damage when my unit touched the side of the oven,After carefully opening it all up, I popped the lens back in the oven at 100C to loosen and remove the adhesive before refitting the lens... while my back was turned, the oven temperature was also turned... UP!
The lens is irredeemably warped and shrunk - but the light cluster itself is all fine,
Can anyone help me urgently source a replacement lens, or failing that a RIGHT HAND (UK DRIVER'S SIDE) clear light, without having to buy the set of two? I'm Brighton based but can collect anywhere in the UK.
Many thanks fellow forumites!


675DMW said:
I have a drivers side clear rear lens that had an intermittent problem with some of the LEDs not working so I replaced it - fully dried out it may well work! - the lens is fine
If its any use to you let me know - I m c 10 miles from Brighton -a small charitable donation will do !
Dave
BIG thanks to Dave 675DMW the car is back together and ready for the Eastbourne motor show tomorrow.If its any use to you let me know - I m c 10 miles from Brighton -a small charitable donation will do !
Dave
Plus a shout out to Paul on eBay who has a load of Aston parts and also offered to help in a hurry:
https://www.ebay.co.uk/usr/fi66067?_trksid=p204767...
It's lovely the power of the good people on this Forum to help one-another

Edited by NealCS on Friday 3rd May 14:14
All’s well that ends well BUT yes - not 1 degree above 100C and once the lens is off and you pop it back in to loosen the glue, just a minute or so.
Top-tip: remove the chrome shelf supports and line the oven sides with corrugated card - if the lens touches the side it melts onto it.


Top-tip: remove the chrome shelf supports and line the oven sides with corrugated card - if the lens touches the side it melts onto it.
Edited by NealCS on Friday 3rd May 16:00
Edited by NealCS on Friday 3rd May 16:01
Edited by NealCS on Friday 3rd May 16:02
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff




