Targa Roof Seals keep rolling off

[zippee]

The 2 side seals on the targa panel have a habit of coming out of their grooves whenever I store the panel in its bag.
Is there an easy fix and does anyone else have this problem? I don't want to glue the seals in place as it'll make it a complete arse to change them in the future, but its very annoying and fiddly to put back in place every time I put the roof back on.

[FunkyGibbon]

I've found that a litte dab of superglue at each end holds the rubber in OK. Still easy enough to remove if required.

[Podie]

I agree with 'gib

Handy tip though...

at the point where it is still in the groove, pinch it hard with one hand... then stretch the rubber with the other hand, so it goes thin.. align it... and watch it pop back in.. then release - job's a good 'un

[V8 Archie]

Mine pop out occasionally, but I've never found it a problem to relocate.

[chris43]

V8 Archie said:

Mine pop out occasionally, but I've never found it a problem to relocate.

Is that what you tell the police?

[V8 Archie]