Leaking gutter part name ?
Author
Discussion

PAT64

Original Poster:

722 posts

85 months

Tuesday 27th August 2019
quotequote all
Any idea what this gutter part name is please ?



or

https://i.ibb.co/6YqzPSh/DSC-1173-Copy.jpg

Its leaking somewhere on the side or in the middle, previous handyman tried gutter silicon on the side
( you can just about see it on the left of red arrow) since he said the seal moved out of place but it did not stop the leak so I wanted to buy the full part instead and have it ready next time.

Its a black Plastic PVC type standard guttering system, cheers





mattfuey

451 posts

164 months

Tuesday 27th August 2019
quotequote all
Half round gutter union

BaldOldMan

5,180 posts

90 months

Tuesday 27th August 2019
quotequote all
They are under £2 - hardly seems worth trying to repair.....

https://www.wickes.co.uk/FloPlast-RU1B-Round-Line-...

dirkgently

2,160 posts

257 months

Tuesday 27th August 2019
quotequote all
The rubber seal has been dislodged because no silicon lubricant has been used at assembly .

PAT64

Original Poster:

722 posts

85 months

Tuesday 27th August 2019
quotequote all
Cheers it certainly does look like an half union gutter on the left but on the right hand side that part looks different or is that the end of the gutter ?

Maybe I should get both bits in case just trying to think ahead


Initforthemoney

743 posts

170 months

Tuesday 27th August 2019
quotequote all
Doesn't look like a standard £2 coupler to me.

Scrump

23,883 posts

184 months

Tuesday 27th August 2019
quotequote all
Looks to me like a standard coupler with a support bracket under one end and some sealant on the other end.

monty999

1,220 posts

131 months

Tuesday 27th August 2019
quotequote all
Difficult to tell for sure from the pic but maybe square to half round union ? If so still only a few quid.

PAT64

Original Poster:

722 posts

85 months

Tuesday 27th August 2019
quotequote all
Initforthemoney said:
Doesn't look like a standard £2 coupler to me.
My gut told me this too !

I actually went toolstation last week and got this part here:

https://www.toolstation.com/112mm-half-round-union...

But it looks similar but different to the ones linked above but has the same name.

Maybe it does need to be unclipped or taken off to see exactly what part type it is ?


PAT64

Original Poster:

722 posts

85 months

Tuesday 27th August 2019
quotequote all
monty999 said:
Difficult to tell for sure from the pic but maybe square to half round union ? If so still only a few quid.
Its all round guttering but yeah did consider this

PAT64

Original Poster:

722 posts

85 months

Tuesday 27th August 2019
quotequote all
Scrump said:
Looks to me like a standard coupler with a support bracket under one end and some sealant on the other end.
I think you could be right on this mystery guttering, it does look like a hob cobbled job !

PAT64

Original Poster:

722 posts

85 months

Wednesday 28th August 2019
quotequote all
Will need to wait for a ladder before I can unclip these gutter bits and see what they really are.

But I did spot this :

https://www.selcobw.com/products/plastics-drainage...

They also have 125mm and 150mm Unions too

https://www.toolstation.com/150mm-union-bracket/p2...

https://www.selcobw.com/products/plastics-drainage...


Could explain why it looks strange there appears different sizes but similar names of union.

Drogo

793 posts

243 months

Wednesday 28th August 2019
quotequote all
PAT64 said:
there appears different sizes but similar names of union.
That's plumbers all over for you!