Battery Accessory Terminal

[jakeharvey63]

I’ve currently got a battery tender, heated grips and a relay attached to my battery and it’s looking a little messy. Does anyone know somewhere that sells something that would allow me to take one set of terminals away from the battery to hook up my accessories to?

I’ve had a google but can’t seem to word what I am looking for.

[Sea Demon]

Something like this: http://www.easternbeaver.com/Main/Bike_Specific/VS...

There are a few different versions of the same thing around, some cheaper.

[vonhosen]

https://www.nippynormans.com/fuse-panels/pdm60-pow...


https://innovv.co.uk/product/innovv-powerhub-2/

[Ed.]

The fuzeblock fz1 also gets good reviews, I went with a cheaper option in the end.

https://www.nippynormans.com/fuse-panels/fuzeblock...

[jjones]

I went with one of these, less than £14:

https://www.amazon.co.uk/gp/product/B07GYTZF35/ref...

[gareth_r]

How about
a 5 quid fusebox
some cable (something suitably hefty from battery to fusebox)
a 30 amp inline fuse
some spade & piggyback spade connectors
a crimp tool.

[Prof Prolapse]

I made something like this and bunged it under my seat.

Uses a nearby switched live and a relay so the board only gets powered up with the ignition on.

Cost about £7.

Edited by Prof Prolapse on Tuesday 1st October 09:58

[gavgavgav]

https://www.sportsbikeshop.co.uk/motorcycle_parts/...

I've got one of these, set up to power up cameras, grips and horns after the ignition is on. Its really tidy and small to install, just really REALLY expensive for what it is.

[poo at Paul's]

Prof Prolapse said:

I made something like this and bunged it under my seat.

Uses a nearby switched live and a relay so the board only gets powered up with the ignition on.

Cost about £7.

Edited by Prof Prolapse on Tuesday 1st October 09:58

Presumably you had to spend £60+ on a dedicated touratech sandwich carrier though, having used your butty box to put the fuses in?

[Prof Prolapse]

poo at Paul's said:

Presumably you had to spend £60+ on a dedicated touratech sandwich carrier though, having used your butty box to put the fuses in?

Kreiga bespoke kevlar cordura lined sandwich holder.

Obvs.