Mesh for cooling ducts

[gsx600]

Well as the front end respray is going ahead this weekend thought I'd replace all the bits I'd taken off

Got new TVR badge
Reasonable new spot lenses - stolen of my 350 !
New chin spoiler

New mesh going over rad,

But anyone know where I can get hold off a circular mesh about 70mm diameter to fit over the brake vent hole - as there is ducting from here feeding the brakes and cold air for the heater.

Also anyone on here use armour fend as was thinking of putting some on the fresh paint before driving a 1000 miles for the LeMans trip the following week.

[jmorgan]

They sell mesh down B&Q. In small sheets.


Edited to add, can't find it on line but it was near the fixings, table legs etc in my local one. Solid metal and mesh sheets etc.

>> Edited by jmorgan on Thursday 2nd June 22:10

[gsx600]

Thats what I,m going to use for the big square bit, but was wondering about pre made circles, bought these to see if they can be wedged / rivited in somehow

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4385561795&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1

[grahamw48]

You mean they're not 'PLUG and play' ?

[jmorgan]

Tin snips and a suitble sized tube or beaker for a pattern and a can of spray paint. Or the can of paint if it is the right size?