Tuesday 7th June 2005
when the drivers side door release pressed dosnt work well sometime s rarely but works from the inside any help would be great as its driving mad plsssssss
Must be a bad connection in the door harness.
Remove the inner door panel and check the terminals, if any of them are green or white replace them.
Tuesday 7th June 2005
also fit a small hook to the inside of the trim and hang the cables and connector on it. This keeps the connector from sitting in the pool of water at the bottom of the door and stops it rotting.
sorry to but in but ive got the same problem, so whats the best and eaiseist way to removed door cards.
>> Edited by r7oky on Tuesday 7th June 20:09
Tuesday 7th June 2005
The door linings come off easily. Undo the allen bolts on the leading edge bottom and rear of the door. You may also need to cut the black mastic at the top of the front of the door. Crefully lift off the lining and all the wiring etc will be exposed. It will take 15 mins if the allen bolts undo ok
Gassing Station | Cerbera | Top of Page | What's New | My Stuff